Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 08-02-2009, 01:57 PM   #1
blueoval
Critical Thinker
 
blueoval's Avatar
 
Join Date: Jan 2005
Location: Adelaide
Posts: 20,374
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Well thought out and constructive posts.  A real credit to this forum. 
Default engine flush for sticky lifters

My car has done 137,000km. Easy driving mainly

The lifters/lash adjusters are noisy. I replace oil every 10,000km and plugs without fail since ownership. The previous owner did the same as it is recorded in the log book.

I have heard different opinions on the use of engine flush additives.

I have also heard some people use a lot of kero to flush their crank case to solve a sticky lifter issue without issue, (not driving the car with that) but replacing the kero with proper oil after.

Im a bit skeptical. Whats best?

__________________
"the greatest trick the devil pulled, is convincing the world he doesn't exist"

2022 Mazda CX5 GTSP Turbo

2018 Hyundai Santa Fe Highlander


1967 XR FALCON 500


Cars previously owned:
2021 Subaru Outback Sport
2018 Subaru XV-S
2012 Subaru Forester X
2007 Subaru Liberty GT
2001 AU2 75th Anniversary Futura
2001 Subaru GX wagon
1991 EB XR8
1977 XC Fairmont
1990 EA S Pak
1984 XE S Pak
1982 ZJ Fairlane
1983 XE Fairmont
1989 EA Falcon
1984 Datsun Bluebird Wagon
1975 Honda Civic
blueoval is offline   Reply With Quote Multi-Quote with this Post
Old 08-02-2009, 02:42 PM   #2
Dave_Obsession
Resident AFF detailer
 
Dave_Obsession's Avatar
 
Join Date: Dec 2008
Location: Melbourne, VIC
Posts: 3,730
Technical Contributor: For members who share their technical expertise. - Issue reason: Helpful and detailed posts on car care. 
Default

Quote:
Originally Posted by blueoval
My car has done 137,000km. Easy driving mainly

The lifters/lash adjusters are noisy. I replace oil every 10,000km and plugs without fail since ownership. The previous owner did the same as it is recorded in the log book.

I have heard different opinions on the use of engine flush additives.

I have also heard some people use a lot of kero to flush their crank case to solve a sticky lifter issue without issue, (not driving the car with that) but replacing the kero with proper oil after.

Im a bit skeptical. Whats best?
My old ED had sticky lifters.......I put in a bottle of some Wynns stuff that was meant to stop them being so sticky and noisy..........hey presto it worked!! No more lifter noise - except maybe a little bit on really cold days @ start-up for 5 seconds, then that stopped as well......

Just my two cents......
__________________
No longer an 'active' detailer.
Dave_Obsession is offline   Reply With Quote Multi-Quote with this Post
Old 08-02-2009, 02:44 PM   #3
blueoval
Critical Thinker
 
blueoval's Avatar
 
Join Date: Jan 2005
Location: Adelaide
Posts: 20,374
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Well thought out and constructive posts.  A real credit to this forum. 
Default

Quote:
Originally Posted by dave93761
My old ED had sticky lifters.......I put in a bottle of some Wynns stuff that was meant to stop them being so sticky and noisy..........hey presto it worked!! No more lifter noise - except maybe a little bit on really cold days @ start-up for 5 seconds, then that stopped as well......

Just my two cents......
That Wynn's stuff is basically Kero. So I might as well use Kero.

Start up lifter noise is normal till oil pressure builds up.
__________________
"the greatest trick the devil pulled, is convincing the world he doesn't exist"

2022 Mazda CX5 GTSP Turbo

2018 Hyundai Santa Fe Highlander


1967 XR FALCON 500


Cars previously owned:
2021 Subaru Outback Sport
2018 Subaru XV-S
2012 Subaru Forester X
2007 Subaru Liberty GT
2001 AU2 75th Anniversary Futura
2001 Subaru GX wagon
1991 EB XR8
1977 XC Fairmont
1990 EA S Pak
1984 XE S Pak
1982 ZJ Fairlane
1983 XE Fairmont
1989 EA Falcon
1984 Datsun Bluebird Wagon
1975 Honda Civic
blueoval is offline   Reply With Quote Multi-Quote with this Post
Old 08-02-2009, 06:09 PM   #4
poolkeeper
Its Resonating!
 
poolkeeper's Avatar
 
Join Date: Jun 2006
Location: Sydney, NSW
Posts: 1,612
Default

You can get some engine flush product from mainlube.
http://www.mainlube.com/cms/

I plan to use this stuff next oil change
poolkeeper is offline   Reply With Quote Multi-Quote with this Post
Old 08-02-2009, 07:14 PM   #5
InfernoSR
Sales Representative
 
InfernoSR's Avatar
 
Join Date: Mar 2007
Location: Young
Posts: 5,314
Technical Contributor: For members who share their technical expertise. - Issue reason: For research and posted write up on cooling system care and repair in AU.COM and offering help where possible 
Default

i used a flush last oil change, MolyTech Engine Detox. Then when it came to filling it up again i also added a bottle of Lucas Oil Stabilizer to my Shell Multigrade oil... works a charm and no noise up top.
__________________
InfernoSR is offline   Reply With Quote Multi-Quote with this Post
Old 08-02-2009, 07:51 PM   #6
blueoval
Critical Thinker
 
blueoval's Avatar
 
Join Date: Jan 2005
Location: Adelaide
Posts: 20,374
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Well thought out and constructive posts.  A real credit to this forum. 
Default

Hey fellas, thanks for the replies.

Can you tell me where you get your products from? Can you get it from a mainstream business, or is it a special order?
__________________
"the greatest trick the devil pulled, is convincing the world he doesn't exist"

2022 Mazda CX5 GTSP Turbo

2018 Hyundai Santa Fe Highlander


1967 XR FALCON 500


Cars previously owned:
2021 Subaru Outback Sport
2018 Subaru XV-S
2012 Subaru Forester X
2007 Subaru Liberty GT
2001 AU2 75th Anniversary Futura
2001 Subaru GX wagon
1991 EB XR8
1977 XC Fairmont
1990 EA S Pak
1984 XE S Pak
1982 ZJ Fairlane
1983 XE Fairmont
1989 EA Falcon
1984 Datsun Bluebird Wagon
1975 Honda Civic
blueoval is offline   Reply With Quote Multi-Quote with this Post
Old 08-02-2009, 08:23 PM   #7
InfernoSR
Sales Representative
 
InfernoSR's Avatar
 
Join Date: Mar 2007
Location: Young
Posts: 5,314
Technical Contributor: For members who share their technical expertise. - Issue reason: For research and posted write up on cooling system care and repair in AU.COM and offering help where possible 
Default

Quote:
Originally Posted by blueoval
Hey fellas, thanks for the replies.

Can you tell me where you get your products from? Can you get it from a mainstream business, or is it a special order?
Got all mine from Supercheap :P
__________________
InfernoSR is offline   Reply With Quote Multi-Quote with this Post
Old 08-02-2009, 08:31 PM   #8
blueoval
Critical Thinker
 
blueoval's Avatar
 
Join Date: Jan 2005
Location: Adelaide
Posts: 20,374
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Well thought out and constructive posts.  A real credit to this forum. 
Default

Quote:
Originally Posted by BLUEPRINT
i used a flush last oil change, MolyTech Engine Detox. Then when it came to filling it up again i also added a bottle of Lucas Oil Stabilizer to my Shell Multigrade oil... works a charm and no noise up top.
Is this the product you are referring to?
http://www.liqui-moly.com.au/product1.htm
__________________
"the greatest trick the devil pulled, is convincing the world he doesn't exist"

2022 Mazda CX5 GTSP Turbo

2018 Hyundai Santa Fe Highlander


1967 XR FALCON 500


Cars previously owned:
2021 Subaru Outback Sport
2018 Subaru XV-S
2012 Subaru Forester X
2007 Subaru Liberty GT
2001 AU2 75th Anniversary Futura
2001 Subaru GX wagon
1991 EB XR8
1977 XC Fairmont
1990 EA S Pak
1984 XE S Pak
1982 ZJ Fairlane
1983 XE Fairmont
1989 EA Falcon
1984 Datsun Bluebird Wagon
1975 Honda Civic
blueoval is offline   Reply With Quote Multi-Quote with this Post
Old 08-02-2009, 09:09 PM   #9
InfernoSR
Sales Representative
 
InfernoSR's Avatar
 
Join Date: Mar 2007
Location: Young
Posts: 5,314
Technical Contributor: For members who share their technical expertise. - Issue reason: For research and posted write up on cooling system care and repair in AU.COM and offering help where possible 
Default

Quote:
Originally Posted by blueoval
Is this the product you are referring to?
http://www.liqui-moly.com.au/product1.htm
Thats the one... well... the Detox is the one :P
__________________
InfernoSR is offline   Reply With Quote Multi-Quote with this Post
Old 08-02-2009, 09:12 PM   #10
blueoval
Critical Thinker
 
blueoval's Avatar
 
Join Date: Jan 2005
Location: Adelaide
Posts: 20,374
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Well thought out and constructive posts.  A real credit to this forum. 
Default

Quote:
Originally Posted by BLUEPRINT
Thats the one... well... the Detox is the one :P
Thanks mate, will pick some Detox and HD oil stabilizer up tomorrow. ;)

Has anyone used the Nulon stuff before? Is it any good?
__________________
"the greatest trick the devil pulled, is convincing the world he doesn't exist"

2022 Mazda CX5 GTSP Turbo

2018 Hyundai Santa Fe Highlander


1967 XR FALCON 500


Cars previously owned:
2021 Subaru Outback Sport
2018 Subaru XV-S
2012 Subaru Forester X
2007 Subaru Liberty GT
2001 AU2 75th Anniversary Futura
2001 Subaru GX wagon
1991 EB XR8
1977 XC Fairmont
1990 EA S Pak
1984 XE S Pak
1982 ZJ Fairlane
1983 XE Fairmont
1989 EA Falcon
1984 Datsun Bluebird Wagon
1975 Honda Civic
blueoval is offline   Reply With Quote Multi-Quote with this Post
Old 09-02-2009, 12:29 PM   #11
blueoval
Critical Thinker
 
blueoval's Avatar
 
Join Date: Jan 2005
Location: Adelaide
Posts: 20,374
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Well thought out and constructive posts.  A real credit to this forum. 
Default

I just bought a bottle of Liqui-Moly Engine Detox for $22.95 and the Lucas HD oil stabiliser for $16.38 from Supersheap Auto.

Will be doing the flush tonight after work.

BLUEPRINT - How much of a difference was there after you did the Detox? Could you notice the ticking as much?
__________________
"the greatest trick the devil pulled, is convincing the world he doesn't exist"

2022 Mazda CX5 GTSP Turbo

2018 Hyundai Santa Fe Highlander


1967 XR FALCON 500


Cars previously owned:
2021 Subaru Outback Sport
2018 Subaru XV-S
2012 Subaru Forester X
2007 Subaru Liberty GT
2001 AU2 75th Anniversary Futura
2001 Subaru GX wagon
1991 EB XR8
1977 XC Fairmont
1990 EA S Pak
1984 XE S Pak
1982 ZJ Fairlane
1983 XE Fairmont
1989 EA Falcon
1984 Datsun Bluebird Wagon
1975 Honda Civic
blueoval is offline   Reply With Quote Multi-Quote with this Post
Old 09-02-2009, 12:33 PM   #12
InfernoSR
Sales Representative
 
InfernoSR's Avatar
 
Join Date: Mar 2007
Location: Young
Posts: 5,314
Technical Contributor: For members who share their technical expertise. - Issue reason: For research and posted write up on cooling system care and repair in AU.COM and offering help where possible 
Default

Quote:
Originally Posted by blueoval
I just bought a bottle of Liqui-Moly Engine Detox for $22.95 and the Lucas HD oil stabiliser for $16.38 from Supersheap Auto.

Will be doing the flush tonight after work.

BLUEPRINT - How much of a difference was there after you did the Detox? Could you notice the ticking as much?
The Detox is the one that removes the crap in the system... the Oil Stibilzer is the one that relubricates and helps reduce the ticking... i just found the Detox to be less harful compaired to some of the other cheaper ones... and i did mine about 3 weeks ago with no signs of issue's to date.

Use the whole bottle of Oil Stabilizer and top with engine oil for best results.
__________________
InfernoSR is offline   Reply With Quote Multi-Quote with this Post
Old 09-02-2009, 01:06 PM   #13
blueoval
Critical Thinker
 
blueoval's Avatar
 
Join Date: Jan 2005
Location: Adelaide
Posts: 20,374
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Well thought out and constructive posts.  A real credit to this forum. 
Default

Quote:
Originally Posted by BLUEPRINT
The Detox is the one that removes the crap in the system... the Oil Stibilzer is the one that relubricates and helps reduce the ticking... i just found the Detox to be less harful compaired to some of the other cheaper ones... and i did mine about 3 weeks ago with no signs of issue's to date.

Use the whole bottle of Oil Stabilizer and top with engine oil for best results.
Thanks mate for your advice. Will see tonight of the benefits noise wise and report back.

How come you used the whole bottle of the stabilizer? I read on the site to use 20% of the bottle per 4 litres of oil. Will using the whole bottle give greater effects?
__________________
"the greatest trick the devil pulled, is convincing the world he doesn't exist"

2022 Mazda CX5 GTSP Turbo

2018 Hyundai Santa Fe Highlander


1967 XR FALCON 500


Cars previously owned:
2021 Subaru Outback Sport
2018 Subaru XV-S
2012 Subaru Forester X
2007 Subaru Liberty GT
2001 AU2 75th Anniversary Futura
2001 Subaru GX wagon
1991 EB XR8
1977 XC Fairmont
1990 EA S Pak
1984 XE S Pak
1982 ZJ Fairlane
1983 XE Fairmont
1989 EA Falcon
1984 Datsun Bluebird Wagon
1975 Honda Civic
blueoval is offline   Reply With Quote Multi-Quote with this Post
Old 09-02-2009, 01:39 PM   #14
InfernoSR
Sales Representative
 
InfernoSR's Avatar
 
Join Date: Mar 2007
Location: Young
Posts: 5,314
Technical Contributor: For members who share their technical expertise. - Issue reason: For research and posted write up on cooling system care and repair in AU.COM and offering help where possible 
Default

Quote:
Originally Posted by blueoval
Thanks mate for your advice. Will see tonight of the benefits noise wise and report back.

How come you used the whole bottle of the stabilizer? I read on the site to use 20% of the bottle per 4 litres of oil. Will using the whole bottle give greater effects?
To be honest... i've never read the site... i might be doing a bit of overkill with mine then... lol... never caused damage in the past 8 years of using the same product in all of my registered cars :P
__________________
InfernoSR is offline   Reply With Quote Multi-Quote with this Post
Old 09-02-2009, 02:12 PM   #15
blueoval
Critical Thinker
 
blueoval's Avatar
 
Join Date: Jan 2005
Location: Adelaide
Posts: 20,374
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Well thought out and constructive posts.  A real credit to this forum. 
Default

Quote:
Originally Posted by BLUEPRINT
To be honest... i've never read the site... i might be doing a bit of overkill with mine then... lol... never caused damage in the past 8 years of using the same product in all of my registered cars :P
I guess it doesnt hurt putting a bit extra in then. Seems to be a bit of added insurance. I might just put in half for now.

What intervals do you change your oil with this additive in it? Do you go for a bit longer than usual?
__________________
"the greatest trick the devil pulled, is convincing the world he doesn't exist"

2022 Mazda CX5 GTSP Turbo

2018 Hyundai Santa Fe Highlander


1967 XR FALCON 500


Cars previously owned:
2021 Subaru Outback Sport
2018 Subaru XV-S
2012 Subaru Forester X
2007 Subaru Liberty GT
2001 AU2 75th Anniversary Futura
2001 Subaru GX wagon
1991 EB XR8
1977 XC Fairmont
1990 EA S Pak
1984 XE S Pak
1982 ZJ Fairlane
1983 XE Fairmont
1989 EA Falcon
1984 Datsun Bluebird Wagon
1975 Honda Civic
blueoval is offline   Reply With Quote Multi-Quote with this Post
Old 09-02-2009, 06:10 PM   #16
InfernoSR
Sales Representative
 
InfernoSR's Avatar
 
Join Date: Mar 2007
Location: Young
Posts: 5,314
Technical Contributor: For members who share their technical expertise. - Issue reason: For research and posted write up on cooling system care and repair in AU.COM and offering help where possible 
Default

Quote:
Originally Posted by blueoval
I guess it doesnt hurt putting a bit extra in then. Seems to be a bit of added insurance. I might just put in half for now.

What intervals do you change your oil with this additive in it? Do you go for a bit longer than usual?
Between my last servicing, i drove 13,000ish kms'... lol! might was a "bit" over due... hence the flush :P but otherwise, i try for around the 10k mark...
__________________
InfernoSR is offline   Reply With Quote Multi-Quote with this Post
Old 09-02-2009, 06:23 PM   #17
blueoval
Critical Thinker
 
blueoval's Avatar
 
Join Date: Jan 2005
Location: Adelaide
Posts: 20,374
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Well thought out and constructive posts.  A real credit to this forum. 
Default

I reckon with a whole bottle of Lucas, you could have got away with 15,000km.
__________________
"the greatest trick the devil pulled, is convincing the world he doesn't exist"

2022 Mazda CX5 GTSP Turbo

2018 Hyundai Santa Fe Highlander


1967 XR FALCON 500


Cars previously owned:
2021 Subaru Outback Sport
2018 Subaru XV-S
2012 Subaru Forester X
2007 Subaru Liberty GT
2001 AU2 75th Anniversary Futura
2001 Subaru GX wagon
1991 EB XR8
1977 XC Fairmont
1990 EA S Pak
1984 XE S Pak
1982 ZJ Fairlane
1983 XE Fairmont
1989 EA Falcon
1984 Datsun Bluebird Wagon
1975 Honda Civic
blueoval is offline   Reply With Quote Multi-Quote with this Post
Old 09-02-2009, 11:03 PM   #18
blueoval
Critical Thinker
 
blueoval's Avatar
 
Join Date: Jan 2005
Location: Adelaide
Posts: 20,374
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Well thought out and constructive posts.  A real credit to this forum. 
Default

Oil change was done after I added the Detox to the engine. Noticed that the tappets got a little quieter during the 10min run in.

Emptied the old oil. Added 2/3rds to 1/2 of the Lucas Oil Stabiliser and an entire 5 litre bottle of HPR GAS 20w-60 and new oil filter. Started the car up. Started as little noisey at first till oil circulated and oil pressure regained. After that, the engine seemed a little smoother but noticeably quieter without the rattle of the tappets.

Gave it a little rev, and could still hear the tappets/lash adjusters a little, but no way near as bad as before. Im only guessing but I reckon the noise will enventually improve over time.

Seems to help the noise level so far. Will know by tomorrow when I drive to work if the engine noise has reduced more so.
__________________
"the greatest trick the devil pulled, is convincing the world he doesn't exist"

2022 Mazda CX5 GTSP Turbo

2018 Hyundai Santa Fe Highlander


1967 XR FALCON 500


Cars previously owned:
2021 Subaru Outback Sport
2018 Subaru XV-S
2012 Subaru Forester X
2007 Subaru Liberty GT
2001 AU2 75th Anniversary Futura
2001 Subaru GX wagon
1991 EB XR8
1977 XC Fairmont
1990 EA S Pak
1984 XE S Pak
1982 ZJ Fairlane
1983 XE Fairmont
1989 EA Falcon
1984 Datsun Bluebird Wagon
1975 Honda Civic
blueoval is offline   Reply With Quote Multi-Quote with this Post
Old 10-02-2009, 09:58 AM   #19
blueoval
Critical Thinker
 
blueoval's Avatar
 
Join Date: Jan 2005
Location: Adelaide
Posts: 20,374
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Well thought out and constructive posts.  A real credit to this forum. 
Default

After driving the car to work, I made the following observations:

* Free-d up a little low down power
* Free-d up some extra rev's and it rev's quicker now.
* The engine doesnt sound like a bag of 'marbles' straight after releasing the accelerator.
* Car idles quieter
__________________
"the greatest trick the devil pulled, is convincing the world he doesn't exist"

2022 Mazda CX5 GTSP Turbo

2018 Hyundai Santa Fe Highlander


1967 XR FALCON 500


Cars previously owned:
2021 Subaru Outback Sport
2018 Subaru XV-S
2012 Subaru Forester X
2007 Subaru Liberty GT
2001 AU2 75th Anniversary Futura
2001 Subaru GX wagon
1991 EB XR8
1977 XC Fairmont
1990 EA S Pak
1984 XE S Pak
1982 ZJ Fairlane
1983 XE Fairmont
1989 EA Falcon
1984 Datsun Bluebird Wagon
1975 Honda Civic
blueoval is offline   Reply With Quote Multi-Quote with this Post
Old 10-02-2009, 10:34 AM   #20
InfernoSR
Sales Representative
 
InfernoSR's Avatar
 
Join Date: Mar 2007
Location: Young
Posts: 5,314
Technical Contributor: For members who share their technical expertise. - Issue reason: For research and posted write up on cooling system care and repair in AU.COM and offering help where possible 
Default

Thats great results mate! i'd be very pleased with that... well i am with my own cars... lol!
__________________
InfernoSR is offline   Reply With Quote Multi-Quote with this Post
Old 10-02-2009, 10:57 AM   #21
graham_h
FF.Com.Au Hardcore
 
graham_h's Avatar
 
Join Date: Jan 2009
Posts: 2,146
Default

I'll have to get some for my EA
It sounds like a bag of spanners on start up
graham_h is offline   Reply With Quote Multi-Quote with this Post
Old 10-02-2009, 12:38 PM   #22
blueoval
Critical Thinker
 
blueoval's Avatar
 
Join Date: Jan 2005
Location: Adelaide
Posts: 20,374
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Well thought out and constructive posts.  A real credit to this forum. 
Default

Im amazed at how gum and oil sludge can sap power from an engine.

I have concluded that by removing as much residue and gunk in the engine with the occasional flush & detox, your engine should better mannered, and give out as much power as it can handle without crap holding it back.

Thanks for the referral BLUEPRINT
__________________
"the greatest trick the devil pulled, is convincing the world he doesn't exist"

2022 Mazda CX5 GTSP Turbo

2018 Hyundai Santa Fe Highlander


1967 XR FALCON 500


Cars previously owned:
2021 Subaru Outback Sport
2018 Subaru XV-S
2012 Subaru Forester X
2007 Subaru Liberty GT
2001 AU2 75th Anniversary Futura
2001 Subaru GX wagon
1991 EB XR8
1977 XC Fairmont
1990 EA S Pak
1984 XE S Pak
1982 ZJ Fairlane
1983 XE Fairmont
1989 EA Falcon
1984 Datsun Bluebird Wagon
1975 Honda Civic
blueoval is offline   Reply With Quote Multi-Quote with this Post
Old 10-02-2009, 03:24 PM   #23
InfernoSR
Sales Representative
 
InfernoSR's Avatar
 
Join Date: Mar 2007
Location: Young
Posts: 5,314
Technical Contributor: For members who share their technical expertise. - Issue reason: For research and posted write up on cooling system care and repair in AU.COM and offering help where possible 
Default

Quote:
Originally Posted by blueoval
Im amazed at how gum and oil sludge can sap power from an engine.

I have concluded that by removing as much residue and gunk in the engine with the occasional flush & detox, your engine should better mannered, and give out as much power as it can handle without crap holding it back.

Thanks for the referral BLUEPRINT
lol... you're welcome mate.
__________________
InfernoSR is offline   Reply With Quote Multi-Quote with this Post
Old 10-02-2009, 03:44 PM   #24
shazaam
Regular Member
 
Join Date: Jun 2008
Location: Tassie
Posts: 408
Default

I must check this stuff out, thanks for the heads up.
shazaam is offline   Reply With Quote Multi-Quote with this Post
Old 11-02-2009, 05:11 PM   #25
MGM
FF.Com.Au Hardcore
 
MGM's Avatar
 
Join Date: Jul 2005
Location: Lyndhurst
Posts: 563
Default

i used the nulon lifter free/tune up 2 days ago just to see what happens, to my surprise the car has got more quiet, not fully gone but hardly noticable now, and i did notice a smoother feeling engine.
MGM is offline   Reply With Quote Multi-Quote with this Post
Old 11-02-2009, 05:24 PM   #26
blueoval
Critical Thinker
 
blueoval's Avatar
 
Join Date: Jan 2005
Location: Adelaide
Posts: 20,374
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Well thought out and constructive posts.  A real credit to this forum. 
Default

Quote:
Originally Posted by MGM
i used the nulon lifter free/tune up 2 days ago just to see what happens, to my surprise the car has got more quiet, not fully gone but hardly noticable now, and i did notice a smoother feeling engine.
good work. I dont mind some of the Nulon products.

I still amazed about the amount of power that was released by doing an engine flush and oil stabilizer. The car just wants to rev, and rev hard!!!

I totally recomend using the Lucas Heavy Duty Oil stabilizer with your next oil change. Its cheap and certainly worthwhile IMHO.
__________________
"the greatest trick the devil pulled, is convincing the world he doesn't exist"

2022 Mazda CX5 GTSP Turbo

2018 Hyundai Santa Fe Highlander


1967 XR FALCON 500


Cars previously owned:
2021 Subaru Outback Sport
2018 Subaru XV-S
2012 Subaru Forester X
2007 Subaru Liberty GT
2001 AU2 75th Anniversary Futura
2001 Subaru GX wagon
1991 EB XR8
1977 XC Fairmont
1990 EA S Pak
1984 XE S Pak
1982 ZJ Fairlane
1983 XE Fairmont
1989 EA Falcon
1984 Datsun Bluebird Wagon
1975 Honda Civic
blueoval is offline   Reply With Quote Multi-Quote with this Post
Old 11-02-2009, 05:38 PM   #27
InfernoSR
Sales Representative
 
InfernoSR's Avatar
 
Join Date: Mar 2007
Location: Young
Posts: 5,314
Technical Contributor: For members who share their technical expertise. - Issue reason: For research and posted write up on cooling system care and repair in AU.COM and offering help where possible 
Default

Quote:
Originally Posted by blueoval
good work. I dont mind some of the Nulon products.

I still amazed about the amount of power that was released by doing an engine flush and oil stabilizer. The car just wants to rev, and rev hard!!!

I totally recomend using the Lucas Heavy Duty Oil stabilizer with your next oil change. Its cheap and certainly worthwhile IMHO.
lol... anyone would think you are happy with it... lol!
__________________
InfernoSR is offline   Reply With Quote Multi-Quote with this Post
Old 11-02-2009, 05:56 PM   #28
blueoval
Critical Thinker
 
blueoval's Avatar
 
Join Date: Jan 2005
Location: Adelaide
Posts: 20,374
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Well thought out and constructive posts.  A real credit to this forum. 
Default

Quote:
Originally Posted by BLUEPRINT
lol... anyone would think you are happy with it... lol!
Am I that obvious??? :

I've never done stuff like this to any of my cars before, and Im just glad I did. Car is running great
__________________
"the greatest trick the devil pulled, is convincing the world he doesn't exist"

2022 Mazda CX5 GTSP Turbo

2018 Hyundai Santa Fe Highlander


1967 XR FALCON 500


Cars previously owned:
2021 Subaru Outback Sport
2018 Subaru XV-S
2012 Subaru Forester X
2007 Subaru Liberty GT
2001 AU2 75th Anniversary Futura
2001 Subaru GX wagon
1991 EB XR8
1977 XC Fairmont
1990 EA S Pak
1984 XE S Pak
1982 ZJ Fairlane
1983 XE Fairmont
1989 EA Falcon
1984 Datsun Bluebird Wagon
1975 Honda Civic
blueoval is offline   Reply With Quote Multi-Quote with this Post
Old 11-02-2009, 06:05 PM   #29
Peuty
Afterburner + skids =
Donating Member1
 
Peuty's Avatar
 
Join Date: Dec 2004
Location: Skidsville
Posts: 12,128
Default

May I ask what the oil stabiliser does? Other than stabilising the oil, of course!
__________________
Speed Kills. So buy an AU XR8 and live forever.

Oo\===/oO
Peuty is online now   Reply With Quote Multi-Quote with this Post
Old 11-02-2009, 07:42 PM   #30
MGM
FF.Com.Au Hardcore
 
MGM's Avatar
 
Join Date: Jul 2005
Location: Lyndhurst
Posts: 563
Default

Quote:
Originally Posted by blueoval
good work. I dont mind some of the Nulon products.

I still amazed about the amount of power that was released by doing an engine flush and oil stabilizer. The car just wants to rev, and rev hard!!!

I totally recomend using the Lucas Heavy Duty Oil stabilizer with your next oil change. Its cheap and certainly worthwhile IMHO.
yeah il do the flush when my oil is due, i usually change around 7000km's. does the engine flush go in a day or so before you drain it?
MGM is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 04:15 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL