|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
17-07-2005, 10:35 PM
|
#1 | ||
|
Boost Addict
Join Date: Jan 2005
Location: North Brisbane
Posts: 1,151
|
ok here is a Q for the brainiacs:
Au Falcin I6 engine crossmember is it the same as the V8 one? planning on bolting a windsor based engine into my I6 and i am quite hoping that i dont have to manufacture new mounts (not that it is hard) Cheers Mic |
||
|
|
|
18-07-2005, 01:40 PM
|
#2 | ||
|
Built Ford Tough
Join Date: Jan 2005
Location: State of Euphoria Mod: F-Series
Posts: 3,035
|
I think you'll discover they have different cross-members.
__________________
Black on white '83 SWB F100 C6 auto 351C on gas and on the ground --> Project Thread '55 F100, just a roller at the moment, new project Silver MY12 Volkswagen Amarok |
||
|
|
|
|
18-07-2005, 02:17 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2005
Location: Brisbane
Posts: 509
|
Easiet way to tell would be to ring Ford Parts and see if they are listed as different part numbers. On the EF/EL the engine crossmember (K-frame) is the same for I6 and V8, and you would think that they'd carry this through, but stranger things have happened.
|
||
|
|
|
|
19-07-2005, 12:55 PM
|
#4 | ||
|
Built Ford Tough
Join Date: Jan 2005
Location: State of Euphoria Mod: F-Series
Posts: 3,035
|
The K-Frame was not carried into AU from EL - they went to an alloy cross-member with other front end suspension changes.
__________________
Black on white '83 SWB F100 C6 auto 351C on gas and on the ground --> Project Thread '55 F100, just a roller at the moment, new project Silver MY12 Volkswagen Amarok |
||
|
|
|
|
19-07-2005, 01:27 PM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2005
Location: Brisbane
Posts: 509
|
I should have re-read that. I meant that they would have carried through the compatibility between I6 and V8 componentry on the same vehicle. AUs do have the alloy crosmember, and we discovered this morning that it is the same for the I6 and V8 in an AU, like the K-frame is in an EF/EL.
|
||
|
|
|
I6 - V8
Linear Mode
