Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Laser and Telstar

Reply
 
Thread Tools Display Modes
Old 12-06-2012, 03:55 PM   #1
Flokos
Starter Motor
 
Join Date: Dec 2008
Posts: 20
Default Telstar AR 1985 - No enging cranking

Dear all,
As I continue the maintenance of my beloved car, after 2 days of colder nights, I could not start the engine properly this morning. First attempt of turning the ignition key indicated a lethargic battery as cranking was attempted. The second try just caused a super-quick rattling noise inside the distributor. I've changed the IC box at the back of the distributor and replaced it with a new one - the same result. I've checked the inside of the distributor ''cylinder'' and inspected the 4 contact points (for the ignition leads) and the central rotating arm - looked fine). Ignition leads and spark plugs are OK. I have not yet changed a NARVA relay switch that has leads towards the starter motor. But, as the first attempt showed an almost dead battery, I suspect it as the cause, even though I've recharged it a week ago, and the car was doing fine....
Your advice would be appreciated. Thanks, Flokos

Flokos is offline   Reply With Quote Multi-Quote with this Post
Old 13-06-2012, 01:47 PM   #2
Flokos
Starter Motor
 
Join Date: Dec 2008
Posts: 20
Default Re: Telstar AR 1985 - No enging cranking

Dear all, problem resolved, the battery was almost dead. Some days ago, I did some cleanup with the window mechanisms during afternoon time, closed all doors as usual & parked the car, that was not moved for 3 days. Last afternoon, I've rechecked all electrical I could and out of interest, decided to recheck the battery - it was almost dead. After recharging it and shut the driver's door, the light under the steering wheel was on, and found out that the driver's door switch was malfunctioning (was on). I assume that this happened, causing the battery to go flat. So, please re-check these switches regularly, else, they can chew plenty of amps.
For the benefit of Telstar drivers, rattling noise inside the distributor = dead battery. Many thanks, Flokos.
Flokos is offline   Reply With Quote Multi-Quote with this Post
Old 04-07-2012, 10:07 AM   #3
Chief Tool
Starter Motor
 
Join Date: Jul 2012
Posts: 13
Default Re: Telstar AR 1985 - No enging cranking

Good to see AR's still kicking around.
Chief Tool is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 04:19 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL