|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
 |
|
|
Thread Tools | Display Modes |
14-01-2023, 10:49 AM
|
#1 | ||
|
Regular Member
Join Date: Mar 2007
Location: morhington Peninsula
Posts: 213
|
During recent work to my 289 Windsor where the engine was removed, evidently my flex plate got bent and needs replacing (C4 auto). What happens with the balancing of a new flex plate, are the already balanced when you buy them? Any advice greatly appreciated.
|
||
|
|
|
15-01-2023, 08:41 AM
|
#2 | ||
|
Mustang GT mmmmmm......
Join Date: Jan 2006
Location: Mornington Peninsula
Posts: 1,459
|
Be careful when purchasing a flex plate that you match the one you have correctly.
Windsor have 157 and 164 teeth starter ring gear and also come in two different balance weights at 28 or 50 ounce. Early ones are normally 157t 28 ounce, later roller cam engines 164t and 50oz. Plenty of people have fitted the wrong flex plate and wonder why the engine has started to badly vibrate. Eagle have a range of flex plates. https://www.eagleautoparts.com.au/pa...20flex%20plate
__________________
I have become a Mustanger. |
||
|
|
|
| This user likes this post: |
|
15-01-2023, 10:11 AM
|
#3 | ||
|
Regular Member
Join Date: Mar 2007
Location: morhington Peninsula
Posts: 213
|
Thanks very much, great advice, I'll get onto Eagle.🙂
|
||
|
|
|
|
15-01-2023, 04:59 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: May 2006
Posts: 1,497
|
If you examine your bent flexplate carefully you will soon be able to match yours. Count the teeth, look at the size of the counter weight and look at its position in relation to the crank bolt hole with the small cut out. Also measure diameter of the torque convertor bolt holes.
They all look different after a bit of practice you'll be good. |
||
|
|
|
|
15-01-2023, 05:04 PM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: May 2006
Posts: 1,497
|
Here's a few to compare.....
https://www.custommustangs.com.au/au...89-302-c4-auto https://www.ebay.com.au/p/1348752782 This one dosen't have a counter weight because the engine has been internally balance: https://outlawspeed.com.au/shop/bm50246 |
||
|
|
|
289w flex plate balance.
Linear Mode
