12.23 Thanks to Bluepower

SLY XR8 · 02-06-2007, 11:25 AM

Well after the ford forum's heathcote drag day and the new Kenne Bell Blower that was fitted thanks to Chris and Agro.

I had th bug to race again...

I took the ute out to Calder last night for a run, with a 12.50 first run strait off the run home and drive to the track.

Than my runs when like this in order
12.45 @ 112.51 mph 1.99 60'
12.35 @ 112.57 mph 1.90 60'
12.37 @ 115.78 mph 2.06 60'
12.23 @ 114.41 mph 1.87 60'

: :thebirds:

This is a stock 260 no pump gears, full weight less hard top and spear wheel.
But still has sub boxs in that weigh's a lot, and was run Micky E/T streets

Once i cat my head around how to drive again as it's a whole lot differant to before.

So once again i'll thank Chris and Agro for all your work on putting such an great package together and some quicker time's are still to be had as it stands.

ratter · 02-06-2007, 11:47 AM

Congrats on the times, it good to see some forced induction feed back on the Boss and on the 1/4

XRQTOR · 02-06-2007, 11:49 AM

Well done Sly, awsome effort. Is your ute an auto or manual.

DABOSS · 02-06-2007, 12:31 PM

Well done Nig.

dute · 02-06-2007, 12:35 PM

Big well done buddy, now get me a beam. . . . . . lol . . . . . .

Craig · 02-06-2007, 02:45 PM

Nice man real nice, good result for a plumbers work hack. That 1.87 60ft is nice, keep doing those and you might just see that 11. something.

Cheers Craig

SLY XR8 · 02-06-2007, 03:27 PM

[QUOTE=XRQTOR]Well done Sly, awsome effort. Is your ute an auto or manual.[/QUOTE

4 speed auto

XRQTOR · 02-06-2007, 03:28 PM

[QUOTE=SLY XR8]

Quote:

Originally Posted by XRQTOR

Well done Sly, awsome effort. Is your ute an auto or manual.[/QUOTE

4 speed auto

Stock converter ??

You also need to change your sig mate.

DOC · 02-06-2007, 03:45 PM

A great time, is the kit the full cooled kit or the bolt on ?

Quadcams · 02-06-2007, 04:49 PM

Well done SLY good results mate and much improved mph, a bit rusty you say, know all about that.

SpoolMan · 02-06-2007, 05:09 PM

Well done Dave, 12.2@114mph.
Since your 12.9@105 mph unopened Vs bolting on the Kenne Belle how much rwkw have you picked up?

Also a comparison on the ET and MPH from Heathcote to Calder much difference?

Leigh Dave's Ute is an auto.

MYV8 · 02-06-2007, 06:40 PM

Well done Dave.
You guys are making me envious.

hot460 · 02-06-2007, 08:28 PM

Quote:

Originally Posted by Craig@ACE

Nice man real nice, good result for a plumbers work hack. That 1.87 60ft is nice, keep doing those and you might just see that 11. something.

Cheers Craig

Great work Dave. Thats a quick work ute you have there mate. :sm_headba

SLY XR8 · 03-06-2007, 09:52 AM

mark at heathcoote my best was 12.34 @ 113 mph so its picked up mph and droped time but that may be cause i'm slowly getting use to what to do as well. So look out next time.

Its got a baby converter 2500

SLY XR8 · 03-06-2007, 09:58 AM

Quote:

Originally Posted by DOC

A great time, is the kit the full cooled kit or the bolt on ?

Mine is the non intercooled kit.

AGRO · 03-06-2007, 12:27 PM

Well done mate.
Who said plumbers aren't good at anything...........
Yes, you have to learn how to drive all over again don't you??????
The car has an 11 in it no probs. Better still, all in street trim.
It's just so hard to get the power to the ground.
Going by your mph, you have the baby tune in it.
Still room to move, that's for sure.
Enjoy the experience man, it won't be long before the tall lanky guy ups the pace with ya car.........he can't help himself!!!!!!

Regards

AGRO.

CAMS290 · 03-06-2007, 01:55 PM

Another Boss nearly in the 11's, well done mate.

Des Flurane · 03-06-2007, 02:57 PM

How's the petrol consumption with the blower fitted?

SpoolMan · 03-06-2007, 07:27 PM

Quote:

Originally Posted by SLY XR8

Its got a baby converter 2500

Dave I think you may need to teach my brother how to get a decent 60 foot...

AGRO · 04-06-2007, 10:12 AM

Quote:

Originally Posted by Des Flurane

How's the petrol consumption with the blower fitted?

The fuel consumption will be around the same as a NA car when cruising. If you keep the car in Vacumm, the bypass valve is open which unloads the blower rotors, therefore, using bugger all hp run the thing. It's only when you go into positive manifold pressure, that more fuel is added to compensate, hence, when the fuel consumption will go out the window.
I have managed 11.3lt/100klm on highway cruize, with a KTM 640 strapped in the back, and that's with giving it a few stabs when coming out of towns that I passed through. That was with 350rwkw.
My daily driving around town nets me approx 17lt/100klm with 400rwkw. I give it a hard time though, as I just can't help myself. Fuel is not an issue as far as I'm concerned, I wouldn't care what is used. If I did, I would bought an excel or something!!!!
In all, this setup will yield good fuel consumption, if you baby it. If you use the power though, you will have to pay.....hp doesn't come for free.
Hope this helps.

Regards

AGRO.

XRQTOR · 04-06-2007, 11:54 AM

Quote:

Originally Posted by AGRO

The fuel consumption will be around the same as a NA car when cruising. If you keep the car in Vacumm, the bypass valve is open which unloads the blower rotors, therefore, using bugger all hp run the thing. It's only when you go into positive manifold pressure, that more fuel is added to compensate, hence, when the fuel consumption will go out the window.
I have managed 11.3lt/100klm on highway cruize, with a KTM 640 strapped in the back, and that's with giving it a few stabs when coming out of towns that I passed through. That was with 350rwkw.
My daily driving around town nets me approx 17lt/100klm with 400rwkw. I give it a hard time though, as I just can't help myself. Fuel is not an issue as far as I'm concerned, I wouldn't care what is used. If I did, I would bought an excel or something!!!!
In all, this setup will yield good fuel consumption, if you baby it. If you use the power though, you will have to pay.....hp doesn't come for free.
Hope this helps.

Regards

AGRO.

With all this talk about oil drying up in the next 10-20 years i'm going to consume as much oil as i can while i can before i get stuck trying to make an electric car go faster. Seriesly who puts a blower on and worries about fuel econemy.

Des Flurane · 04-06-2007, 02:12 PM

Quote:

Originally Posted by XRQTOR

With all this talk about oil drying up in the next 10-20 years i'm going to consume as much oil as i can while i can before i get stuck trying to make an electric car go faster. Seriesly who puts a blower on and worries about fuel econemy.

Me

:
I live in Auckland and we've been loaded with a 10% increase in gas for congestion charges!
Seriously, if the difference is 2 or 3 l/100kms no problem, if the regular drive puts it over the 20 l/kms then that may be an issue.
Some of those cammed Holdens are pretty thirsty

My XR8 does 14.8 @ 42km/h so 16-17 is not a problem.

F6BF · 04-06-2007, 05:06 PM

Quote:

Originally Posted by ratter

Congrats on the times, it good to see some forced induction feed back on the Boss and on the 1/4

Couldnt agree more

Congratulations......hope 11s come soon for u

AGRO · 05-06-2007, 06:39 PM

Quote:

Originally Posted by XRQTOR

With all this talk about oil drying up in the next 10-20 years i'm going to consume as much oil as i can while i can before i get stuck trying to make an electric car go faster. Seriesly who puts a blower on and worries about fuel econemy.

That's easy to do man.
Can't wait to get me hands on one of these cars in the near future!!!!:evil3: :evil3: :evil3:

XRQTOR · 05-06-2007, 07:30 PM

Quote:

Originally Posted by AGRO

That's easy to do man.
Can't wait to get me hands on one of these cars in the near future!!!!:evil3: :evil3: :evil3:

HOw you going to strap a blower on one of them

. I know you can up the voltage for easy power but how we'll be giving it a squirt then pulling up for an hour to recharge the battery.

Just don't go using all th oil till i get my licence back.