![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
The Pub For General Automotive Related Talk |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
You wanna do what??
Join Date: Oct 2008
Location: Kallangur, Qld
Posts: 418
|
Years ago while working on my Nissan Patrol 4WD up north, I was working underneath it trying to pull the gearbox out and it shifted on the jacks/stands (front) it was on. The whole truck dropped about 2 inches onto large blocks of wood that we had placed under the chassis for "Justin" (justin case).
Since that time, I have always been carefull to the point of going overboard regarding safety when working on cars. Do you have anything that really freaks you out about working on your car? Today, about to do my diff oil before finding a "tag" [IMG] ![]() EDIT: Forgot to say I had wheel chocks on the front and rear of the other back tyre ![]()
__________________
Merging lanes- Cos its "rare sense". Used to be common, but not anymore Cleaning wheelie bins- Cats are good too. Fill to about 20cm with water, add soap and cat. Hold lid firmly closed for two minutes. Be sure to stand well clear when releasing cat. All Whirlpool gold. |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
FF.Com.Au Hardcore
Join Date: Aug 2005
Location: Barossa Valley, South Australia
Posts: 3,381
|
It's never too safe when you can have around two tonne falling on top of you.
__________________
Cheers, Sam. |
||
![]() |
![]() ![]() |
![]() |
#3 | ||
FF.Com.Au Hardcore
Join Date: Feb 2010
Location: Sun City, North Australis
Posts: 4,274
|
Few years back while I had my XB up on jacks, was installing the newly rebuilt diff. Car was on 2 chassis stands.
For some reason the car suddenly moved sideways. I was underneath it when it happen (but there was no fuel tank in the way). Had no idea how or why.. and I left it for a day and came back the next. Made sure i put some old rims under the car from then on..
__________________
You've seen it, you've heard it and your still asking questions?? Don't write off the Goose until you see the box going into the hole.... |
||
![]() |
![]() ![]() |
![]() |
#4 | ||
meh.
![]() Join Date: Jul 2010
Location: Was Central Coast, Now Sydney NSW
Posts: 8,584
|
Just O/T for a moment, Justin Case as in white EF Justin?....
__________________
Previous - BF XR6T - 325rwkw, 6 Speed Auto, Process West, X-Force and Turbosmart gear |
||
![]() |
![]() ![]() |
![]() |
#5 | |||
Banned
Join Date: Mar 2009
Posts: 688
|
Quote:
Ah nooooo................ Just-in-Case....................................... ![]() |
|||
![]() |
![]() ![]() |
![]() |
#6 | ||
meh.
![]() Join Date: Jul 2010
Location: Was Central Coast, Now Sydney NSW
Posts: 8,584
|
![]() ![]() ![]() Location make's **** really mixed up... How the **** I didn't realise what had been said, I dunno....... Back on topic from me, I always have one stand on each side, and a fully raised jack sitting in between them, with just a bit of weight on it.....
__________________
Previous - BF XR6T - 325rwkw, 6 Speed Auto, Process West, X-Force and Turbosmart gear |
||
![]() |
![]() ![]() |
![]() |
#7 | ||
playing in my big shed
Join Date: Sep 2005
Location: miriam vale , qld
Posts: 3,302
|
using one of those small floor jacks worry me a bit.
i had one that collasped when i had the rhr corner of the XB half way jacked once. one of the side stays ( the black upright bit on yours) just folded up and the whole thing fell over sideways. i haven`t used that style of jack since.
__________________
`75 XB FAIRMONT sedan . mushroom beige, injected 351, toploader, 9inch `10 FG XR50 Turbo ute. Nitro blue, 6 sp Auto, Leather trim. `04 BA RTV tray back, Red, V8 auto, `04 BA XR6 Turbo sedan. Blueprint. auto, Leather trim. `03 BA XLS ute . Acid Rush, factory lpg, auto, `48 TEA20 Grey Ferguson, `62 Willys 6-230 , 4x4 light truck `04 Yamaha TTR 250 |
||
![]() |
![]() ![]() |
![]() |
#8 | |||
You wanna do what??
Join Date: Oct 2008
Location: Kallangur, Qld
Posts: 418
|
Quote:
![]() Cheers
__________________
Merging lanes- Cos its "rare sense". Used to be common, but not anymore Cleaning wheelie bins- Cats are good too. Fill to about 20cm with water, add soap and cat. Hold lid firmly closed for two minutes. Be sure to stand well clear when releasing cat. All Whirlpool gold. |
|||
![]() |
![]() ![]() |
![]() |
#9 | ||
I ♥ EDM
![]() Join Date: Aug 2006
Posts: 5,141
|
Working under my cars has always scared the hell out of me. I always worry about whether or not I placed the stands in the right spots. So Im the same, always putting more things underneath.
Also having recently heard of a guy that was dragged a few meters by his Buick after it fell & rolled, has just enforced that even more. |
||
![]() |
![]() ![]() |
![]() |
#10 | ||
FF.Com.Au Hardcore
Join Date: Jun 2009
Posts: 18,985
|
i fell asleep under the XA with just one of those bodgy 20yo trolley jacks holding it up.. zzzzz.. fidiot......
|
||
![]() |
![]() ![]() |
![]() |
#11 | ||
Guest
Join Date: Feb 2007
Location: Gods Country
Posts: 16,258
|
I took my rear muffler off some time ago while the back tyres were on ramps. The front tyres were chocked once i realised the height wasn't right and my jack couldn't go any higher , so i needed some wood to put the jack on and my car was now on a 20degree angle pointing down my driveway with a 1" chock under my front wheel LOL.
Anyway the tyres were now a good 8"s off the ramps and after losing litres of blood i wasn't giving up until that tailpipe was past the diff... actually as soon as the jack started slipping off the wood i bailed pretty quick . ![]() Do NOT try this at home !! |
||
![]() |
![]() ![]() |
![]() |
#12 | |||
Sling Shot
Join Date: Jun 2009
Location: Canberra
Posts: 444
|
Quote:
![]() |
|||
![]() |
![]() ![]() |
![]() |
#13 | |||
Cane Farmer
Join Date: Jun 2006
Location: Tom Price, WA
Posts: 4,056
|
I once reversed my XR6 up some ramps. And off them. In one fluid backwards motion.
__________________
1994 ED XR6T - Cobalt Blue. 2009 FG XR6 - Black. Quote:
|
|||
![]() |
![]() ![]() |
![]() |
#14 | |||
Petro-sexual
Join Date: Dec 2004
Location: Melbourne
Posts: 4,527
|
Quote:
I'm pretty careful when it comes to working on the car. If I have to be a little dodgey I just make sure my arms and legs are clear of things like disc rotors. |
|||
![]() |
![]() ![]() |
![]() |
#15 | ||
BF Ute...
Join Date: Jul 2005
Posts: 1,351
|
Never be under a car using the Ford scissor jack, have had one collapse on me...
|
||
![]() |
![]() ![]() |
![]() |
#16 | |||
playing in my big shed
Join Date: Sep 2005
Location: miriam vale , qld
Posts: 3,302
|
Quote:
i now use one of the larger workshop 2.5T floor jacks to do the lifting and have a set of those ratchet style car stands that i put under the chassis rails and/or diff housing. i then let the load off the jack but usually leave it under the car. solid hard wood blocks are good for packing under the car as stands too, but never use bricks.
__________________
`75 XB FAIRMONT sedan . mushroom beige, injected 351, toploader, 9inch `10 FG XR50 Turbo ute. Nitro blue, 6 sp Auto, Leather trim. `04 BA RTV tray back, Red, V8 auto, `04 BA XR6 Turbo sedan. Blueprint. auto, Leather trim. `03 BA XLS ute . Acid Rush, factory lpg, auto, `48 TEA20 Grey Ferguson, `62 Willys 6-230 , 4x4 light truck `04 Yamaha TTR 250 |
|||
![]() |
![]() ![]() |
![]() |
#17 | ||
Boss 335
Join Date: Jan 2006
Posts: 4,330
|
I can get under my car to check things out without any kind of jack, with all wheels on solid ground.
![]() ![]() |
||
![]() |
![]() ![]() |
![]() |
#18 | ||
FF.Com.Au Hardcore
Join Date: May 2009
Location: Benalla vic
Posts: 628
|
Jacking up the front of the car its always in a FWD gear and hand break on. Jack and 2 axle stands, no issues for me... so far =)
|
||
![]() |
![]() ![]() |
![]() |
#19 | |||
Guest
Join Date: Feb 2007
Location: Gods Country
Posts: 16,258
|
Quote:
I bled out all alone.. something to think about i reckon ? |
|||
![]() |
![]() ![]() |
![]() |
#20 | ||
FF.Com.Au Hardcore
Join Date: Jul 2005
Location: Victoria, The no fun state
Posts: 1,668
|
I use the tripod style stands i find the ones with the single post and pin abit flimsy the tripod ones are more expensive but i find them way more stable
|
||
![]() |
![]() ![]() |
![]() |
#21 | ||
Join Date: Dec 2004
Posts: 9,292
|
Jacks and jack stands - all unsafe and wouldnt trust either with my life.
Doing big work under a car - use a hoist or dont do the work. I spent nearly 2 days under a pano with only a jack holding it up - on dirt, got out the 3rd day, jacked it up, took the front wheel off and leaned over into the engine bay and it all fell down. That could have been me under it any time the previous 2 days. |
||
![]() |
![]() ![]() |
![]() |
#22 | |||
You wanna do what??
Join Date: Oct 2008
Location: Kallangur, Qld
Posts: 418
|
Quote:
![]() Cheers Mick
__________________
Merging lanes- Cos its "rare sense". Used to be common, but not anymore Cleaning wheelie bins- Cats are good too. Fill to about 20cm with water, add soap and cat. Hold lid firmly closed for two minutes. Be sure to stand well clear when releasing cat. All Whirlpool gold. |
|||
![]() |
![]() ![]() |
![]() |
#23 | ||
FF.Com.Au Hardcore
Join Date: Feb 2007
Location: Cattai, Sydney
Posts: 7,701
|
Pretty twisted dream there Daz
I should definitely be safer with cars in the garage. Sometimes I can be a bit careless. Haven't worked on a car in a while now though since i'm always in company cars.
__________________
1992 EBII Fairmont Ghia 4.0l <---Click for the Gallery! Insta@mooneye_ghia White on bright red smoothies with thick whitewalls. Cruising around to some rockabilly |
||
![]() |
![]() ![]() |
![]() |
#24 | ||
Performance moderator
![]() Join Date: Feb 2005
Location: St Clair..N.S.W
Posts: 14,875
|
I had my old XA roll down ramps and squashed me so bad I had blood coming out my ears..
I managed to jam a hammer between ground and body to lift it enough so I could take small quick breaths.. I asked the guy helping me to put auto in N so I could line up driveshaft... The dead brain took the handbrake off !!! Then the car rolled off the steel ramps.. XA's have big exhaust mufflers and deep sill joins which cut into my ribs.. Which are sore to touch 25 years latter... I do the same now at least two methods of supporting vehicle.. I break out in sweat every time I work under a car, kinda like claustrophobia... Strange part is when I got back inside after they lifted the car off me the Mr's said "have you fixed that car yet" !!! F+@& yea...
__________________
Real cars are not driven by front wheels,real cars lift them!!... BABYS ARE BOTTLE FED, REAL MEN GET BLOWN. Don't be afraid to try something new. Remember, amateurs built the Ark...Professionals built the Titanic! Dart 330ci block turbo black pearl EBXR8 482 rwkw.. Daily driver GTE FG.. Projects http://www.fordforums.com.au/showthread.php?t=107711 http://www.fordforums.com.au/showthr...8+turbo&page=4 |
||
![]() |
![]() ![]() |
![]() |
#25 | ||
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
|
i cam remember as a young buk about the age of 15 my mate and i playing mechanic on the old mans lowered EH, we had the car raised on the drivers side with our old favorite the dreaded scissor jack, anyway my buddy crawled under to look at the big exhaust system, he`d been under there about 10 seconds when the scissor jack folded sideways and the car came down with a thump, i thought my mate was dead for sure, he shimmied out unscathed except for a large deposit in the undies,
lucky he was a skinny bugger, it missed him by about a hairs width he reckons, you rarely get a second chance when a car lands on you, going over board is a good thing when working under car, lesson learned for my mate and i. |
||
![]() |
![]() ![]() |
![]() |
#26 | ||
FF.Com.Au Hardcore
Join Date: Feb 2011
Location: On The Footplate.
Posts: 5,086
|
You can never take too much care. I've got a favorite piece of tree stump that I roll over whenever I'm taking a wheel off the car. If it's something more, I've a set of old 8" wide 12-slotter chrome steel wheels that get put into service by being put under the car (lying down flat of course), or, when it's on ramps, sat on the ramps in front of the rear wheels as long as they aren't in the way, plus blocks in front of the wheels on the ground.
I only ever had one scissor jack start to bend once, but had the wheel back on and threw it after use. I never trust my old trolley jack...I always use a backup of some sort. Of course, it gets reinforced at work because one old guy has the nickname "jack" after many years ago having a car fall on his head and shoulders, pinning him for an amazing three hours until someone found him... |
||
![]() |
![]() ![]() |
![]() |
#27 | ||
FF.Com.Au Hardcore
Join Date: Aug 2008
Posts: 548
|
Scissor jacks dangerous! Anyone remember the original 68 XT hilift type jack ( they attached to the bumper bars ), now they were dodgy. I remember changing a wheel on a footpath that had a camber falling towards the gutter, nothing drastic. Up we go, wheel off about to put spare on oh oh over she comes into a telegraph pole that happened to be there. Never used that jack again.
|
||
![]() |
![]() ![]() |
![]() |
#28 | |||
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
|
Quote:
|
|||
![]() |
![]() ![]() |
![]() |
#29 | ||
FF.Com.Au Hardcore
Join Date: Mar 2006
Posts: 706
|
when doing anything major underneath i use 2 sets of ramps ,front and back both facing in cant go anywher then,also helps to fit the gut under
![]() |
||
![]() |
![]() ![]() |
![]() |
#30 | ||
Banned
Join Date: Sep 2009
Location: launceston TAS
Posts: 1,847
|
Good on ya. I use 2 3000kg stands, jacks and wheels! Better to be safe than VERY sorry.
And holding a car up on grass and dirt is just plain dumb. Some people really need to think before just doing what they want or need to do. |
||
![]() |
![]() ![]() |