AU Alloy Rim Size?

SpoolMan · 24-07-2005, 02:58 PM

Below is a picture of a AU XR 16'' inch alloy, i need to know what is the exact width of this alloy?
if you are 100% sure, your help would be much appreciated.

Casper · 24-07-2005, 03:00 PM

7 inch wide....100%
Both the 16" and 17" rims on the AU were 7" wide.

Can just make it out on the scan in the Exterior section:
http://www.fordforums.com.au/photos/...cat=596&page=1

SpoolMan · 24-07-2005, 03:08 PM

Yeah thanks Shane your on the money, bloody good them scans..
the AU series 1, 17'' i thought that was 8'' alloy but its a 7'' as well.
.
Is that the widest 16'' for an AU?

Casper · 24-07-2005, 03:15 PM

yep, all 7". No need for anything bigger really.

**Peuty** · 24-07-2005, 03:22 PM

I'll back that up, 100%

buickman · 24-07-2005, 05:48 PM

The series 2 had 17X8 in the tickford style & I thought the XR Tickford style series 1 were 17X8 as well.

buickman

Dark Horse · 24-07-2005, 06:20 PM

Quote:

Originally Posted by Casper

yep, all 7". No need for anything bigger really.

I can think of a few people who will disagree with this statememt lol!

:

Apart from that Casper is correct.

:

JC · 24-07-2005, 07:11 PM

Correct for the 16", but not for the 17".

16 x 7 - Falcon S/XR6 rims
17 x 8 - XR8 rims.

Not for the first time, the brochure is incorrect.

Wheels FORD FALCON AU II XR8
Rim material Alloy
Front tyre description 235/45 ZR17
Rear tyre description 235/45 ZR17
Rear rim description 8.0Jx17
Front rim description 8.0Jx17

Casper · 24-07-2005, 07:20 PM

I was only referring to the AU1 rims. Now you got me thinking. I might have to take one of my rims off to have a look. I always thought it was 7" as well.

Qwikcorty · 24-07-2005, 07:29 PM

ive got that same wheel as a spare in my au1 xr8, strange they put that there, instead of a 17 or steelie.

JC · 24-07-2005, 07:35 PM

Casper - I 100% guarantee they are a 17 x 8. If not, then this is my last post on these forums - cos if I don't know that, then I know nothing!

AUXRVIII · 24-07-2005, 07:57 PM

The 17's are definately 8". I fit tyres to them on regular occations & rim width info is required for balancing.

12 · 24-07-2005, 08:08 PM

I concur with buickman, JCXR8 and AUXRVIII. I had the AU1 Tickford 17" on my AU XR8 and they're definitely 8" wide.

Casper · 24-07-2005, 08:10 PM

cool, I like being proven wrong in this sort of way.
Anyhow, whats the biggest tyre an 8" can fit?

SpoolMan · 24-07-2005, 09:06 PM

So the brochure is incorrect..naughty naughty Ford.
I want to put a 16x255 M/T drag radial on the AU 16''.
I was hoping for the AU 16'' to be at least 7.5''.
Toyota Celica 5 stud, they have a 16''x8'' and i have been told the offset may be the same as the AU, BA. What worries me will the centre hole fit.

dxr88u · 24-07-2005, 09:21 PM

Quote:

Originally Posted by Casper

Anyhow, whats the biggest tyre an 8" can fit?

casper i have 8 inch wide rims on my car and on the back i have 265x30x19's
not sure if thats the right combo with 8 " rims but it sure gives the car a meaner looking profile.

FAIRMONTAU2 · 24-07-2005, 09:31 PM

As for best handling/performance the wider the tyre, even though it fits, doesn't necessarily correspond to best handling. The rim tyre ratio width should not deviate by much or a rolling effect comes into play.

**Mechan1k** · 25-07-2005, 06:40 PM

Just as a side note I have a set of these 16" rims for sale with 215/60R14 rubber on them

outside · 25-07-2005, 08:31 PM

at what cost ?

12 · 25-07-2005, 11:22 PM

Quote:

Originally Posted by XRFPV8

So the brochure is incorrect..naughty naughty Ford.
I want to put a 16x255 M/T drag radial on the AU 16''.
I was hoping for the AU 16'' to be at least 7.5''.
Toyota Celica 5 stud, they have a 16''x8'' and i have been told the offset may be the same as the AU, BA. What worries me will the centre hole fit.

If it's just for the 1/4 mile and on the rear of the ute, I wouldn't think it's a big deal?? The center bore would be more important up front for steering wheel vibration reasons. By the way, Toyota Supra's have a 16"X9" factory alloy wheel ('93-'98). The offset is +50 from memory, but the PCD is the same as Ford. That's about 10mm further in than the Ford AU/BA offset (max of +40). But on the rear of the ute, it shouldn't matter I would think. Plenty of room under there. You could go 16X275 M/T's even.. just watch that the rubber doesn't rub on the inner side against the ute tub with the Supra 16X9.

Pic of wheel I'm referring to:

SpoolMan · 26-07-2005, 09:10 AM

Quote:

Originally Posted by 012

If it's just for the 1/4 mile and on the rear of the ute, I wouldn't think it's a big deal?? The center bore would be more important up front for steering wheel vibration reasons. By the way, Toyota Supra's have a 16"X9" factory alloy wheel ('93-'98).

the centre bore must fit perfect, at 105 mph it's very important.