|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
26-06-2008, 04:34 PM
|
#1 | ||
|
Starter Motor
Join Date: Oct 2006
Posts: 17
|
I have a S1 Forte wagon. I just got a nokia car kit for nix and wanted to put a presenter in. Problem.
After searching for photos, it seems the "low" model console is not made for the presenter. Can I just change out the console bin for a new one with presenter, or, is it typical Ford and I have to change the whole center console?? Help would be appreciated. Dave |
||
|
|
|
26-06-2008, 04:41 PM
|
#2 | ||
|
Afterburner + skids =
 
Join Date: Dec 2004
Location: Skidsville
Posts: 12,136
|
Nope it will fit in your console. The presenter actually screws into the console itself, so use some self tappers and it should all be sweet. I think a minor bit of cutting is required as well, but I forget where....
I did it to my old AU many years ago but the brain is a bit fuzzy as to where I had to cut. (Keep quiet Russell......)
__________________
Speed Kills. So buy an AU XR8 and live forever. Oo\===/oO |
||
|
|
|
|
26-06-2008, 06:51 PM
|
#3 | ||
|
not here much anymore
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
|
Should fit without need to cut
__________________
2024 F150 XLT
|
||
|
|
|
|
27-06-2008, 01:27 PM
|
#4 | ||
|
Starter Motor
Join Date: Oct 2006
Posts: 17
|
Thats cool, thanks for the replies
now I just have to get one.......................................... Dave |
||
|
|
|
|
27-06-2008, 05:44 PM
|
#5 | ||
|
Chairman & Administrator
  
Join Date: Dec 2004
Location: 1975
Posts: 107,290
|
I think I still have one sitting down in the garage - shall have a look over the weekend.
Cheers Russ
__________________
 Observatio Facta Rotae
|
||
|
|
|
|
29-06-2008, 10:11 AM
|
#6 | ||
|
Starter Motor
Join Date: Oct 2006
Posts: 17
|
Well, pulled the centre console out yesterday............no phone wire
 : I'm hoping the D/H's that installed the CB in the slot under the radio didn't pilfer it for power etc. Trouble is I can't get the radio out. I've made the tool up out of coathanger wire, but it still feels "stuck" one side will move a little with tool in but is still hitting on something other side doesn't move at all! Pull both tools out the radio is rock solid. Can I pull the front fascia off the dash(fan controlls etc.) and get to the radio that way, is the lock for the radio stuffed?? Lastly, if the wire for the phone is still there, what loom will it be coming from. Thanks again Dave |
||
|
|
|
|
29-06-2008, 05:49 PM
|
#7 | ||
|
not here much anymore
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
|
Phone wire is an additional loom you can buy from Ford which the connects to your carkit
Fascia cannot be taken off unless you remove radio first - do not push too hard because if you stuff the pegs up that hold it in you will never be able to get it out.
__________________
2024 F150 XLT
|
||
|
|
|
|
29-06-2008, 06:33 PM
|
#8 | ||
|
64 Deluxe 4 door
Join Date: Jun 2007
Location: Raxacoricofallapatorius
Posts: 10,407
|
Did you find a presenter yet? I pulled one out of mine last week
__________________
XM Deluxe FG XR50 BA Pursuit Ute |
||
|
|
|
Phone presenter help
Linear Mode
