|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-12-2009, 11:02 AM
|
#1 | ||
|
I wanna XR5
Join Date: Aug 2005
Location: South Oz
Posts: 749
|
no wonder i had a vibration!!!
lucky this was on the pressure plate side, so flywheel all good I got an exploded diagram from ford of the clutch area before i pulled it appart. Shows a one piece flywheel but once apart its a dual mass! very glad it was ok cause it would have ment a new one if it was damaged. 
__________________
Great Wall X240. Bouncing around the APY Lands Ex Ford owner and member of this great site for ages. South Australia, where the RIGHT hand lane is the NEW LEFT lane??????!!! %&#@* |
||
|
|
|
05-12-2009, 12:49 PM
|
#2 | ||
|
yum
Join Date: Jan 2005
Posts: 1,417
|
Wow thats insane
__________________
2005 LS Focus LX
Nov05 | Manual | Black Sapphire 250,000kms. |
||
|
|
|
|
05-12-2009, 01:24 PM
|
#3 | ||
|
Regular Member
Join Date: Feb 2009
Posts: 249
|
too many burnouts!
|
||
|
|
|
|
05-12-2009, 03:18 PM
|
#4 | ||
|
Regular Member
Join Date: Oct 2008
Posts: 198
|
Was the flywheel side still intact??? Must be a result of dropping the clutch pedal, the shock would have broken apart the organic facing where the pressure plate met each time, and eventually the facing just gave out...
__________________
I drive my American Owned, German Inspired, South African Built, Australian Bought, European Styled, English Powered car. I might have missed something somewhere... 08' LT Ford Focus CL Check out 819FLY!! |
||
|
|
|
|
06-12-2009, 08:49 AM
|
#5 | |||
|
Regular Member
Join Date: Sep 2009
Posts: 131
|
Quote:
__________________
1400 GTR Goes like it has a Kwaka up its butt |
|||
|
|
|
|
06-12-2009, 10:39 PM
|
#6 | ||
|
I wanna XR5
Join Date: Aug 2005
Location: South Oz
Posts: 749
|
About 10 months ago I tried! to take off from a set of lights and was in third!!! not first like you should. I did a good job cause after pulling it out of gear while still rolling along the clutch pedal just went to the floor (stuck it together).
I put a bit of force on the gear stick and it finally went into gear (while still rolling along) and clutch pedal came back. It then shuddered when initially taking off but after that all other gear changes ok. so thought I had just glazed the clutch. a few months later i flushed the clutch fluid, It was black! But no real vibration till about a week ago and getting hard to change gears. Took me about 4 hours and $650 to do the clutch, did the axel seals also. Later that day the wife took the car, took off from a set of lights and as the clutch is lighter now dropped it and lit the tyres up. So yeah too many burn outs!!!! lol
__________________
Great Wall X240. Bouncing around the APY Lands Ex Ford owner and member of this great site for ages. South Australia, where the RIGHT hand lane is the NEW LEFT lane??????!!! %&#@* |
||
|
|
|
One Stuffed Clutch
Linear Mode
