![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Starter Motor
Join Date: Nov 2019
Location: Whangaparoa
Posts: 10
|
Hi All
Forgive me if this has already been redressed multiple times already but i've tried my best to search a solution to this issue. My MK5 has failed it's WOF inspection due to tired U Joints on the drive shaft. These are the factory fitted "staked/penged" U Joints. I've been told this is a specialist job that can only be carried by 2 businesses in New Zealand. One in the south Island and one in the north for a price that I can't afford. Question is, I have some universals from Repco that appear to be held in place with a cir-clip on what appears to be on the inside of the Yoke, Not fixed as factory by a cap on the outside. Does anyone have any experience in changing out the factory fitted U Joints that can point me in the right direction for some info? Thanks in advance |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
Chairman & Administrator
![]() ![]() Join Date: Dec 2004
Location: 1975
Posts: 107,019
|
The staked ball joints can be replaced with the kits like THIS one.
__________________
Observatio Facta Rotae
|
||
![]() |
![]() ![]() |
![]() |
#3 | ||
Starter Motor
Join Date: Nov 2019
Location: Whangaparoa
Posts: 10
|
This
https://www.burtonpower.com/universa...er-ujkit2.html is very similar to the joints I have from Repco. As far as I understand the ones that are held in place by a clip on the outside of the trunnion would require a groove for the clip to sit in? Since I will be replacing staked joints I'm left with the one option of the cir-clip type on the inside of the yoke? |
||
![]() |
![]() ![]() |