|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-09-2007, 07:31 PM
|
#1 | ||
|
Starter Motor
Join Date: Sep 2007
Posts: 3
|
Hey,
having trouble with my gfs car, KJ laser, the brake light globes are stuffed and need to replace them, Im guessing you undo the two screws and they should pop off however ive hit a problem, they dont pop off. is there a trick to it or something? Cheers in advance, ive looked all over the net Michael |
||
|
|
|
03-09-2007, 09:52 PM
|
#2 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
just a guess
the screws just hold the lense in place and the bulbs are replaced from the back of the lense assembly lense may have been siliconed in to stop the water one type with care are ther little plastic tags holding the bulb electricals to the back of the lenses in the boot section
__________________
My car goes Brumm Brumm |
||
|
|
|
|
16-09-2007, 01:22 PM
|
#3 | ||
|
Giddy up.
Join Date: Dec 2004
Location: Kramerica Industries.
Posts: 15,637
|
There is two screws you need to take out, you can see them once you open the hatch, then all you need to do is pull the whole brake assembly straight out, it will be tight because they slot into a sleeve, you will see this as you take it out, but don't be affraid to pull it hard, as you need to.
|
||
|
|
|
KJ laser tail light removal
Linear Mode
