Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Focus

Reply
 
Thread Tools Display Modes
Old 21-06-2010, 03:04 AM   #1
ah-see
Starter Motor
 
Join Date: Oct 2009
Posts: 26
Default Need help removing air vents

Hey, i need to remove my air vents as i have gotten some soft drink onto the air louvers which have caused them to be a little sticky.
I have a 2006 focus and the air vents i'm talking about are the ones on the center dashboard.

ah-see is offline   Reply With Quote Multi-Quote with this Post
Old 21-06-2010, 03:54 PM   #2
leakey
FF.Com.Au Hardcore
 
leakey's Avatar
 
Join Date: Jun 2009
Location: Adelaide
Posts: 1,024
Default

Just drive your car in to a lake with the windows down. It will wash out any spilled Coke that way and clear away lots of unwanted flotsam too.

Or, have a look at this article to get an idea of what the vent looks like. You can see the tabs that hold it in place. But in your case, I think you need to do the opposite, i.e. our vent controls are at the bottom, so the clips too are probably at the bottom.


http://www.google.com.au/imgres?imgu...26tbs%3Disch:1

Good luck with it.
__________________
XG Falcon Ute, XE Fairmont Ghia & BA Mk II Falcon SR
leakey is offline   Reply With Quote Multi-Quote with this Post
Old 22-06-2010, 03:24 PM   #3
ah-see
Starter Motor
 
Join Date: Oct 2009
Posts: 26
Default

It's harder than i thought... anyone have first hand experience with a 2006 focus with air vents like in this pic?

ah-see is offline   Reply With Quote Multi-Quote with this Post
Old 22-06-2010, 08:39 PM   #4
DZFord
FF.Com.Au Hardcore
 
DZFord's Avatar
 
Join Date: Jan 2009
Location: Victoria
Posts: 877
Technical Contributor: For members who share their technical expertise. - Issue reason: LS Focus PCV Valve & Hose replacement, a very detailed write up with photos. 
Default

There are two retaining clips on the upper side of the air vent. You will need to insert a flat blade screw driver into the air vent to release the clips. The whole air vent will release and slide out.
DZFord is offline   Reply With Quote Multi-Quote with this Post
Old 20-02-2012, 02:17 PM   #5
hercules
Starter Motor
 
Join Date: Feb 2012
Posts: 7
Default Re: Need help removing air vents

That's helped me out as well.
Thanks DZFord
hercules is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 09:31 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL