|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| Blue Power Racing Developments The home of Blue Power. Website Link |
 |
|
|
Thread Tools | Display Modes |
28-08-2011, 09:19 PM
|
#1 | ||
|
Regular Member
Join Date: Apr 2011
Posts: 61
|
hey guys i have just instaled a side mount blower to my ba xr8 what is the best thing to do with the oil breathers on the rocker covers as i have been told not to put the pipe back on to the intake as it may corse the dipstick to pop out from preasure build up
|
||
|
|
|
28-08-2011, 09:58 PM
|
#2 | ||
|
www.sctflashtuning.com
Join Date: Jan 2005
Posts: 3,142
|
Best thing to do is run the breather hose back into the intake hose before the throttle body ,if the dip stick is coming out it means compression is passing the rings and the engine is on the way out . Very common with these Capa style of blowers . We will not fit them as they always have problems
__________________
Australia's No1 Ford Enhancement Specialist 103 Northgate Drive Thomastown VIC 3074 Phone: 03 9464 5100 Fax: 03 9464 5166 |
||
|
|
|
supercharged oil problem
Linear Mode
