![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Starter Motor
Join Date: Mar 2022
Posts: 4
|
I'm about to do the clutch on my WS fiesta, the workshop manual shows a weird ford tool that can be bought from europe to do the clutch alignment, which I don't want to buy. The engine is out and on the stand, I googled thinking I'll get a cheap tool from repco or supercheap. No deal. What has everyone used when they have swapped their clutches?
|
||
![]() |
![]() ![]() |
![]() |
#2 | ||
Starter Motor
Join Date: Apr 2024
Posts: 10
|
In a pinch you can use something like a socket in the clutch disc splines and a rod through it into the flywheels spigot bearing. It's not ideal, but also not dodgy. You really should buy the plastic clutch alignment tool/s available on ebay. If you have a garbage transmission you can cut the input shaft off and use that. A good quality clutch kit should however come with the plastic tool....
|
||
![]() |
![]() ![]() |
![]() |
#3 | ||
Starter Motor
Join Date: Mar 2022
Posts: 4
|
Thank you great info. I bought an excedy tuff clutch, sadly, no tool.
|
||
![]() |
![]() ![]() |
![]() |
#4 | ||
FG XR6 Ute & Sedan
![]() Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 22,938
|
Check with Supercheap ; they sell the Exedy and Clutchpro brand of alignment tools and I think they have one designed for your car probably https://www.supercheapauto.com.au/p/...PO3124599.html and it's worth paying the $10 for one that is designed to fit the flywheel splines. Ditto with Repco.
__________________
regards Blue |
||
![]() |
![]() ![]() |