|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
18-08-2013, 12:31 PM
|
#1 | ||
|
Regular Member
Join Date: Aug 2005
Posts: 139
|
my rear sl king springs have sagged a bit with the lgp tank.
rather than get new sl's and have them sag again or goto low's and have it sit too high i was thinking that maybe i could get some coil spacers about 15mm thick to bring the height back to where it should be. is this as simple as it sounds or am i missing something here? |
||
|
|
|
18-08-2013, 01:13 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
|
i don't see why it would not work, but if it were me , i think i fork out for some more suitable springs, perhaps a bit heavier to make up for the added weight of the lpg tank.
|
||
|
|
|
|
18-08-2013, 02:03 PM
|
#3 | ||
|
Regular Member
Join Date: Aug 2005
Posts: 139
|
a bit heavier would be nice, but then what springs would i go for? and it would be a bit of a gamble getting the height right.
|
||
|
|
|
|
18-08-2013, 04:23 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
|
sorry i wouldn't have a clue mate, a suspension place should be able to give you a heads up.
|
||
|
|
|
|
18-08-2013, 04:44 PM
|
#5 | ||
|
Auto Nerd
Join Date: Feb 2012
Location: Sydney
Posts: 808
|
If it helps you, I have a dual fuel set up on an AU III. Have king lows on all round.
From hub to guard. Front - 355mm Rear - 345mm. |
||
|
|
|
|
18-08-2013, 06:44 PM
|
#6 | ||
|
Regular Member
Join Date: Aug 2005
Posts: 139
|
yeah, mine are 335mm front and 320mm rear. i just put a jack under the towbar and lifted it upto 345mm, it still looked pretty good so it might be a good compromise.
|
||
|
|
|
|
18-08-2013, 08:28 PM
|
#7 | ||
|
Peter Car
Join Date: Dec 2004
Location: geelong
Posts: 23,145
|
I used Whiteline 10mm coil spacers in the rear of my Fairlane.
|
||
|
|
|
coil spacers to lift rear
Linear Mode
