XR6 Not as fast as i thought

tacticz · 30-04-2005, 06:49 PM

hi guys,

just brought a AU1 XR6, and really happy with it,did the auto change thing from aufalcon.com, but what i not happy about is i had a drag with a EL/EF 4.0 and we were neck and neck i thought i might beat him by atleast a car length, is there something wrong with my car? it's done 150,000 km's i have had it 5 days and havn't done a thing to it,also what stacker unit do i need as the guy before me had it stolen?

cheers,
Dan

rag top · 30-04-2005, 07:10 PM

Is your XR6 a HP or a VCT??

Also, was the EF/L a stocker or was it worked??

tacticz · 30-04-2005, 07:16 PM

mines the HP without the IRS, i fairly sure the EL/EF was stock, i have noticed that i did clean the exhaust tip with chrome polish when i brought it and now there is some black build up, around the tip, a sign of running rich? or did the xr's run rich? should i get someone like ulttra tune 2 tune it or someone more racing breed to do it?, also im in Adelaide

EFFalcon · 30-04-2005, 07:25 PM

any stock Falcon runs rich :/

tacticz · 30-04-2005, 08:17 PM

i think i'll do what casper did to his xr lol

Casper · 30-04-2005, 08:19 PM

Quote:

Originally Posted by tacticz

i think i'll do what casper did to his xr lol

lol, you wont be disappointed.

Of course, its booked into JMM again early August for some more surgery. More about that after its all done.

_2:

tacticz · 30-04-2005, 08:55 PM

JMM is in melbourne?

EFFalcon · 30-04-2005, 09:05 PM

Quote:

Originally Posted by useless

A tune will give a good starting point.

what can u tune dammit.

EFFalcon · 30-04-2005, 09:06 PM

Yes, JMM are in melbourne, but they do mail order parts.
any mechanic would be able to fit them, u may even be able to get them to recommend someone?

cArSiK · 30-04-2005, 09:11 PM

Quote:

Originally Posted by useless

If you are in Sydney go and speak to Spiro at autotech egineering about getting a good tune up.Your xr6 should be smoking the other car.

On the other hand a 4.0 with extractors and exhaust will smoke the standard xr6.

I would be thinking ofJim Mock extractors and a 2.5 inch exhaust .If you need some good ideas go to http://www.aufalcon.com/aufalcon.htm
This is a great site with lots of goddies .I would recommend you take another look.

mate where about is autotech in sydney? my VCT is an absolute slug at the moment , what type of tune could spiro do for me?

James

30-04-2005, 10:21 PM

1) Good headers/exhaust, 2) chip (recommend ChipTorque), 3) never see that EF again!

MustangNicko · 30-04-2005, 10:41 PM

A stock flowing 270kpa regulator will stop it from running rich

Casper · 30-04-2005, 11:11 PM

Quote:

Originally Posted by EFFalcon

what can u tune dammit.

In a word, NOTHING. The EF and AU's are not "tunable" without a chip of some kind. They can be manipulated like mustangnicko said but not tuned.

buickman · 30-04-2005, 11:20 PM

I suppose a new air filter and spark plugs or leads if needed is about the extent of the backyard tuner on late model fords.

buickman

RED_EL_XR8 · 01-05-2005, 02:27 AM

Quote:

Originally Posted by EFFalcon

what can u tune dammit.

just as much to tune as any old school engine. The only thing that has changed is the tuning tools required!

INJECTED_250 · 01-05-2005, 11:01 AM

No on an old school car, there were points dwell, valve clearnces, float levels, jet sizes, Heaps the tunner could play with...... now days a set of leads plugs and filters...

Casper · 01-05-2005, 11:08 AM

Quote:

Originally Posted by INJECTED_250

No on an old school car, there were points dwell, valve clearnces, float levels, jet sizes, Heaps the tunner could play with...... now days a set of leads plugs and filters...

Actually red is right and in fact there is more that can be tuned on a modern EFI car. The big difference is you really cant do it yourself, you need a tool (like a unichip) and the skills to match. Then you can really tune it to a fine degree. The difference is you are talking about any one learning to tune where as now it is a specialised field and needs extra hardware to do it.

tacticz · 01-05-2005, 01:29 PM

how much would a good exhaust/extractors sytem cost me?

also anyone now about the stacker unit i need?

Casper · 01-05-2005, 01:31 PM

Quote:

Originally Posted by tacticz

how much would a good exhaust/extractors sytem cost me?

good or the best?

tacticz · 01-05-2005, 02:16 PM

both? price gap differrence
the car is also on gas does this matter?
i just pulled the bonnet to look at the intake box it comes through the snorkel into the box and out through my gas system and the rubber hose connecting it is split halfway through does this effect my performance/air flow?

tacticz · 01-05-2005, 08:32 PM

:

buickman · 01-05-2005, 11:45 PM

Quote:

Originally Posted by Casper

Actually red is right and in fact there is more that can be tuned on a modern EFI car. The big difference is you really cant do it yourself, you need a tool (like a unichip) and the skills to match. Then you can really tune it to a fine degree. The difference is you are talking about any one learning to tune where as now it is a specialised field and needs extra hardware to do it.

The computer dynostic machine that is connected to the Ecu would pick up any senser that would be faulty and the general operating condition. Which most home mech would not have.

But fitting of pre programmed hot chips for stock factory mtrs should be fool proof in fitting if each harness has a specific keylock configuration from the manufacture.
Iam only a novice with computers but if the chip is pre programed what would you need to tune?

buickman

au-steve · 02-05-2005, 04:20 PM

running rich? lean it out with some boost brother

:

coz NA I6's are for p**fs!! :sm_headba

just kidding, get a JMM zorst setup (extractors and 2.5" system i think they use).
Then the next punk in his EF will be smoked!! AU's are sick.

tacticz · 02-05-2005, 07:07 PM

meh, went to profix for extractors 2day and they said my current exhuast is stuffed holes in muffler and joins so i got quote for hi-flow cat/extractors/and mufflers $1100, and a guy here at modbury wants $1350 for unichip install and tune, also i have the issue with split cold intake hose/join.

are these good prices?

loxxr6 · 02-05-2005, 08:54 PM

Unichip is normally 1250-1400 so your price sounds about right.

What brand extractors ? You'd really be best getting an opinion on those before committing to it as some brands really don't cut it.

tacticz · 02-05-2005, 09:26 PM

pacemaker, but i wanna go JMM

JC · 03-05-2005, 01:34 AM

Either will do. Not much point going to the additional expense of JMM, if you are restricting your intake anyway (with the LPG setup). Pacemakers are still a good header for the non-VCT 6's.

Mr Cube · 03-05-2005, 09:55 AM

Quote:

Originally Posted by au-steve

coz NA I6's are for p**fs!! :sm_headba

I don't wanna be a poof anymore.

au-steve · 03-05-2005, 05:16 PM

$1100? not sure. I got quoted $850 for a complete 3" system, including highflow steel cat, stainless dump pipe, and single straight through muff. Probably the extractors that are costing a bit.

au-steve · 03-05-2005, 05:23 PM

Quote:

Originally Posted by Mr Cube

I don't wanna be a poof anymore.

then buy a turbo! or even better, get a V8!!