|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-08-2011, 05:18 PM
|
#1 | ||
|
Starter Motor
Join Date: Sep 2010
Posts: 24
|
Just after some info on gap setting for the tappets on this engine.
|
||
|
|
|
10-03-2012, 08:41 PM
|
#2 | ||
|
Love the 88' Telstar Ghia
Join Date: Feb 2012
Posts: 2
|
|
||
|
|
|
|
04-07-2012, 10:14 AM
|
#3 | ||
|
Starter Motor
Join Date: Jul 2012
Posts: 13
|
The 8v head is 0.2mm on the cam side and 0.3mm on the valve side measured hot.
The 12v head is hydraulic. |
||
|
|
|
1988 ford telstar manual or tappet specs
Linear Mode
