Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Fiesta, Festiva and Ka

Reply
 
Thread Tools Display Modes
Old 29-10-2012, 09:16 PM   #1
FordFalconBF
2008 BF Futura
 
FordFalconBF's Avatar
 
Join Date: Sep 2005
Location: Adelaide, S.A.
Posts: 595
Default Does anyone own a Haynes 2002-2008 Ford Fiesta repair Manual?

Hey,
I have one on order right now (Haynes Manual), but I don't think I'll get it before I need to fix two things.
I was wondering if someone could please scan the section on replacing the Water Pump and Replacing the auxiliary belt..

It's for a 2004 WP Mk6 Ford Fiesta 1.6 Petrol.

Thanks in advance,
Alan.

__________________
2008 BF Falcon Futura
2009 BF Falcon Wagon Dedicated LPG

Previous Cars:
2003 BA Falcon Wagon Dedicated LPG
1999 Ford Fairlane Ghia
XF Fairmont Ghia
Escort MK2 RS2000 Replica
FordFalconBF is offline   Reply With Quote Multi-Quote with this Post
Old 03-11-2012, 02:27 AM   #2
zabatron
Regular Member
 
Join Date: Jul 2008
Posts: 338
Default Re: Does anyone own a Haynes 2002-2008 Ford Fiesta repair Manual?

I have a wp fiesta haynes manual here...according to the manual,no belt tensioner is fitted to the 1.6 litre Duratec engine as the belt used is the stretch fit type(just like a giant rubber band).The only way to remove the drive belt is to cut it.New,genuine Ford belts are supplied with several special plastic tools required to fit the new belt.To gain access to belt,there is a lower drive belt cover behind drivers side front wheel which must be removed(easy to do,just unclip power steering pipe and remove the 2 retaining screws,and you may also get better access to water pump by removing the rh side headlight.Water pump removal is pretty straight forward once you have the drive belt off.
zabatron is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 04:16 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL