Quickest 4.0 NA

[Big Matt]

Not sure if this has been asked before or not but does anyone know what is the quickest 4.0l NA in the country? Street car or race car. Thanks

[1TUFFUTE]

try a search on RED EB or 13 sec ba.Quite a touchy subject around hear i fear my friend. Someone else can tell u who owns them... :lookedat:

[eed-250]

in an e-series?? probably mock..

In a cortina or early falc im sure there are some out there running 11/12 second 1/4's

[needfordspeed]

Street car would probably be STOKEB at 13.9 without NOS and i think it was a 13.2 with NOS.

race car would be the mock car at 13.4 (IIRC)

[5speedeb]

yeah e series its the jmm red eb with a 13.3 other then that

i think a member of the forums has a cortina that runs 12's i think

[XRchic]

I thought Corty 6s were either 3.3 or 4.1... Apologies if I am wrong.

It would be the Mock EB and Mock XT (which ran 13.8 @ 100mph I think).

[Ryan]

Originally Posted by XRchic

I thought Corty 6s were either 3.3 or 4.1... Apologies if I am wrong.

It would be the Mock EB and Mock XT (which ran 13.8 @ 100mph I think).

250 X Flow Cortinas were 4.1L. ;)

[eed-250]

well

lots of people put 4.0ls in xd/xfs and cortinas..

there was a 4.0l in an xd at the drags a while back running heaps of low 14 passes..

[Big Matt]

Thanks for the info guys. I know of a nissan 260z up here in brisvegas that has run as quick as 12.6 na with a 4.0l. I am in the process of doing a new engine for my xh ute and am hoping to be able to match its pace fingers crossed.

[MYLO_XR6]

i know someone who has a CL Valiant Charger with a 4.3 L (straight 6) running low 12's!

no nos, no forced induction, just powered by a 600 mech. holley carby

hemi power!

note: everyday driver

[OED666]

mines the quickest e series in qld i think...

[FS5]

Originally Posted by OED666

mines the quickest e series in qld i think...

by a long shot

[XDSLIDER]

When it comes to 4.0L Performance, nobody has stepped up to the JMM Challenge yet! Many are trying but we will just have to wait and see what they come up with. I believe the closet SOHC 4.0L to the Mock EB (STOKEB) is running a few JMM goodies anyway.

As for BA DOHC 4.0L, JMM have the quickest one and the next closet is a car fitted with a JMM kit.

Anybody else seeing a trend here????

;)
Luke

[5speedeb]

Originally Posted by XDSLIDER

When it comes to 4.0L Performance, nobody has stepped up to the JMM Challenge yet! Many are trying but we will just have to wait and see what they come up with. I believe the closet SOHC 4.0L to the Mock EB (STOKEB) is running a few JMM goodies anyway.

As for BA DOHC 4.0L, JMM have the quickest one and the next closet is a car fitted with a JMM kit.

Anybody else seeing a trend here????

;)
Luke

sure do mate :hihi: :hihi: :hihi:

[XA-Coupe]

Originally Posted by XDSLIDER

When it comes to 4.0L Performance, nobody has stepped up to the JMM Challenge yet! Many are trying but we will just have to wait and see what they come up with. I believe the closet SOHC 4.0L to the Mock EB (STOKEB) is running a few JMM goodies anyway.

As for BA DOHC 4.0L, JMM have the quickest one and the next closet is a car fitted with a JMM kit.

Anybody else seeing a trend here????

;)
Luke

The reads like an Ad

[XDSLIDER]

Maybe I should ask them for a job XA-Coupe;

BIG LUKE, Head Of Marketing for JMM.

Just dosen't sound right to me.

Results speak for themselves though mate, can't argue with results!!!!


LUKE

[XA-Coupe]

I'm sure Brendan will appreciate it anyway

Best I add a small quote :

Originally Posted by big matt

Quickest 4.0 NA
Not sure if this has been asked before or not but does anyone know what is the quickest 4.0l NA in the country? Street car or race car. Thanks

not "which workshop does 6 pack stuff " so what JMM do or don't do is totally irrelevant.

[1TUFFUTE]

Originally Posted by XDSLIDER

When it comes to 4.0L Performance, nobody has stepped up to the JMM Challenge yet! Many are trying but we will just have to wait and see what they come up with. I believe the closet SOHC 4.0L to the Mock EB (STOKEB) is running a few JMM goodies anyway.

As for BA DOHC 4.0L, JMM have the quickest one and the next closet is a car fitted with a JMM kit.

Anybody else seeing a trend here????

;)
Luke

Thats exactly why i chose to go to all the effort to get their gear sent up here and put in my ute. I did alot of research and found they had a good name and the quickest falcons out there by a country mile. Obviously there are people out there that can do a similair job but u have to prove yourself in this game. Talks cheap i say. :newangel:

[XA-Coupe]

Jeesuz, do we give a flog what they do ?? No
Next irrelevant post gets deleted.

[OED666]

14.268 @ 98.19 MPH and not one JMM part... There is definitely more in my car as it currently is. I have just put a new clutch and flywheel in on friday, which will allow for higher rpm shifts.

13's is what i am looking for

[Craig]

mmmmmmmmmm interesting.

[Laminge]

Originally Posted by XA-Coupe

The reads like an Ad

Of course it reads like an add.

[1TUFFUTE]

Originally Posted by OED666

14.268 @ 98.19 MPH and not one JMM part... There is definitely more in my car as it currently is. I have just put a new clutch and flywheel in on friday, which will allow for higher rpm shifts.

13's is what i am looking for

Thats a mad time..have any idea how heavy ur car is mate

[OED666]

na, i dont know, i would be keen to weigh it though.

there was no weight reduction made to my car for that time either...

[1TUFFUTE]

bit off weight reduction and a little more attention and shell be in the 13s in no time
Before u no it ul be challenging the JMM cars bud. Nice work tho

[Big Matt]

Yeah oed666 that mile an hour is awesome for the et. Well done mate. If you don't mind me asking what management are you running? That is the only real issue that I have to sort out before I drop my donk into my ute.

[OED666]

i am running my standard computer with a chiptorque chip. it also badly needs a retune. i believe its got more in it. i have finally got my launch right, after nearly 3 years of going to willowbank

[jonbays]

Originally Posted by OED666

14.268 @ 98.19 MPH and not one JMM part... There is definitely more in my car as it currently is. I have just put a new clutch and flywheel in on friday, which will allow for higher rpm shifts.

13's is what i am looking for

This is good really good and the mph is excellent

what cam is this then?

i want one!

[INJECTED_250]

THere are a few decent 4.0's getting built.. JUst need a DEV5+ kitted 4.0 in a cortina, that would be interesting :> .. 98 mph is pretty healthy :> id be keeping that cam to ya self?... sure cam mabie???

[OED666]

its a surecam. i rang Phil and said, i have an AU XR6 motor, T5z, 4.11 diff gears, extractors, etc.. I dont care about the idle!!, i want good mid range and great top end... and thats what i got...