|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
15-01-2007, 06:23 PM
|
#1 | ||
|
mezzo forte
Join Date: Dec 2006
Location: Geelong
Posts: 306
|
Where abouts on the firewall do I run the power lead to my amplifier??
cheers nic |
||
|
|
|
15-01-2007, 06:36 PM
|
#2 | ||
|
Miami Pilot
 
Join Date: Jan 2005
Location: ACT
Posts: 21,703
|
If it's auto, there's a spare grommet where the clutch cable would go - through there would be the best place. If it's manual, through the hole where the bonnet cable goes is a good spot, but you have to feed the cable in from inside the car and then use a coat hanger to grab the wire in the engine bay side.
More info: http://www.fordforums.com.au/showthr...light=firewall http://www.fordforums.com.au/showthr...light=firewall
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb) 1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs). Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings FPV 335 build stats: <click here> Ford Performance Club ACT |
||
|
|
|
|
15-01-2007, 06:44 PM
|
#3 | ||
|
mezzo forte
Join Date: Dec 2006
Location: Geelong
Posts: 306
|
Ta. Its auto so should be easy
|
||
|
|
|
|
15-01-2007, 07:09 PM
|
#4 | ||
|
mezzo forte
Join Date: Dec 2006
Location: Geelong
Posts: 306
|
haha couldnt find any grommet near where the clutch cable would go! but in the proccess i found a beauty just to the left (from inside bonnet) of the brake cylinder, i think a power steering wire goes through it.
cheers |
||
|
|
|
firewall opening
Linear Mode
