|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
20-11-2011, 02:48 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2005
Posts: 588
|
I'm sure everyone who owns an AU knows about this sound, but since I got my brakes done it's heaps worse. I noticed they tightened the handbrake cable, if they overdid it could the brake shoe be rubbing against the wheel even though the lever in the cabin is all the way down?
It seems particularly bad when I reverse into a car spot and come out 10 mins later, like in a shopping centre, it's screeching and moaning every corner for the next few minutes. It's REALLY bad. Not so much if I park forwards. Often when I'm releasing the brake I can feel the ratcheting mechanism as it comes down, even though I have the button pushed all the way in. Before they did my brakes it was always smooth. Any ideas? |
||
|
|
|
20-11-2011, 03:01 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: May 2005
Location: On a knifes edge!
Posts: 3,408
|
Yes, I understand your pain. Have you tried pulling over and telling her to get out? Either that or sit there and shut up.
Seriously though, they are a pain in the rear to adjust and get right. It's a matter of messing about with it to get a happy medium. It's a bugger of a thing. Hopefully someone can through some light on this a little more by airing a few tips. I have heard filing a chamfer on the inside edge of the shoe. |
||
|
|
|
|
21-11-2011, 11:32 AM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2009
Posts: 727
|
Yep - horrible things to get right, if possible take it back to brake shop and explain, they may come to the party and re-adjust.
Otherwise the usual trick is leave hand brake on, place in reverse and slowly reverse the car - it may settle things down for awhile. Good luck |
||
|
|
|
|
21-11-2011, 11:47 AM
|
#4 | |||
|
FF.Com.Au Hardcore
Join Date: Jun 2005
Posts: 588
|
Quote:
If they can't fix it then I'll try that. Feeling the ratchets as it comes down can't be normal. |
|||
|
|
|
|
26-11-2011, 08:05 PM
|
#5 | ||
|
Banned
Join Date: Apr 2010
Location: NSW
Posts: 1,424
|
with mine i found the shoe was nicely polished by previous incorrect adjustments, and it made alot of noise
the fix was a new pair of handbrake shoes, and i adjusted them so it took 11-13 clicks on the lever to hold the car...... the initial pain of having to pull up the handbrake lever a few more clicks than usual was better than adjust the **** over & over again |
||
|
|
|
|
27-11-2011, 12:59 AM
|
#6 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2005
Posts: 588
|
Strange things happening - the lever is going down smoothly now, and I've hardly heard a squeak in the past few days... just the occasional chirp when going around a corner at speed.
It's strange because I haven't done anything!!! |
||
|
|
|
Horrible moaning from park brake?
Linear Mode
