|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
 |
|
|
Thread Tools | Display Modes |
10-01-2017, 06:44 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2005
Location: Melbourne
Posts: 6,918
|
Car has been running rough, and recently threw a P0171 code, so I decided to clean the O2 sensors. Currently have the sensors soaked in petrol.
When I put them back in, do I need to use grease / anti seize on the threads? If so, can I use any old grease or does it have to be a specific kind? |
||
|
|
|
10-01-2017, 06:48 PM
|
#2 | |||
|
You can't stop the signal
Join Date: Nov 2005
Location: Behind a computer at work
Posts: 1,624
|
Anti-seize.
New sensors generally come with this already on the threads. Helps removing them after heat cycling
__________________
Quote:
|
|||
|
|
|
|
10-01-2017, 06:52 PM
|
#3 | ||
|
Regular Member
Join Date: Jul 2013
Location: Sydney N.S.W
Posts: 431
|
My new 02 sensors came with grease but I can't help on what type it was.
|
||
|
|
|
|
10-01-2017, 08:44 PM
|
#4 | ||
|
Gen Y Falcon nut
Join Date: Jun 2012
Location: sydney
Posts: 195
|
copper grease is usually the go
__________________
BA XR8, Boss 315, T56, Herrod Cams, BPR CAI, X-Force head to tail, |
||
|
|
|
|
10-01-2017, 09:53 PM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2010
Posts: 1,547
|
Anti seize or copper grease. Super Cheap has anti seize for under $10 a tube.
|
||
|
|
|
10-01-2017, 10:09 PM
|
#6 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2005
Location: Melbourne
Posts: 6,918
|
Thanks. I'll have to pick some up tomorrow and re-apply it.
Damn...the car idles perfectly now, and the way it accelerates is way smoother. Not sure if it is due to the O2 sensor clean, or whether because the temp is cooler and the tune is adjusting. The last week, which has been hot and humid in Melb, it was spluttering and coughing at idle. Have also cleared the DTC so will see if P0171 comes back. |
||
|
|
|
What grease for o2 sensor threads
Linear Mode
