|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-08-2015, 09:36 AM
|
#1 | ||
|
Starter Motor
Join Date: Dec 2013
Posts: 22
|
Hi all,
Back with some questions about the ford focus 2008 transmission. First of all, is this a dual clutch transmission? and is this the 4F27E? Lots of information about the US focus, not sure if its exactly the same in Australia. Next, the problem. When moving from park to reverse there is a clunk sound coming from the front half of the car. Moving to reverse from any other gear is fine. The clunk is the loudest when the reverse gear is selected after the car has been parked for awhile. The clunk is not too loud after it has been driven for awhile. There is also always a slow hum/whine while the reverse transmission engages (about 1 second to engage). This can be heard almost all the time the car goes into reverse and from any gear. I had replaced some fluid and the transmission fluid filter at the start of this year Worried that my transmission is going to need a rebuild. Thanks for reading! |
||
|
|
|
04-08-2015, 09:39 AM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2006
Posts: 7,331
|
Quite often cars will clunk coming out of park if when you stop, the first thing you do is put it in park before applying the handbrake or releasing the pedal brake. You end up with the weight of the car held by the transmission and not the handbrake.
|
||
|
|
|
|
04-08-2015, 10:39 AM
|
#3 | ||
|
Starter Motor
Join Date: Dec 2013
Posts: 22
|
The thing is, I was aware of that and very often I press the brakes put the car into neutral, pull the hand brakes, release the brakes to let the car rest on the hand brakes, then put the car into park. I do this deliberately to prevent wear on the parking pawls. I have never heard this clunk happen before too. This sound can also happen when coming to a stop (engine still running), put to park, then put to reverse.
Thanks for your input! |
||
|
|
|
|
04-08-2015, 10:49 AM
|
#4 | |||
|
Regular Member
Join Date: Nov 2011
Posts: 169
|
Quote:
|
|||
|
|
|
|
04-08-2015, 12:52 PM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2008
Location: Melbourne
Posts: 804
|
early LT diesels only came with 6 spped manual transmission
|
||
|
|
|
04-08-2015, 03:01 PM
|
#6 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2009
Location: Victoria
Posts: 877
|
Yes, you have a 4F27E transmission, providing it is a petrol model, and now the diesel as pursuit2359 has pointed out
|
||
|
|
|
|
05-08-2015, 10:08 PM
|
#7 | ||
|
Starter Motor
Join Date: Aug 2013
Posts: 28
|
Probably the engine mounts... there's a hidden one below the battery tray, the other two should be pretty easy to locate
__________________
EO XR5 Turbo: PS u412, Deresonated Xforce Catback, 200 cell cat, 3" downpipe, Dreamscience CAI, Airtec Gen 3 IC, Turbosmart dual port, RS injectors, Elevate TCV, VT torque mount, King Springs, Bilstein B8s, Whiteline RARB, Adjustable Camber arms, PDW Oasis, Bonnet strut lifters |
||
|
|
|
Ford focus 2008 automatic clunk from park to reverse
Linear Mode
