Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 26-08-2007, 07:00 PM   #1
NC1183
FF.Com.Au Hardcore
 
NC1183's Avatar
 
Join Date: Apr 2005
Location: Moree, NSW
Posts: 2,076
Default Dome Light

Is it possible to wire the dome lights so that they have the ON - OFF - DOOR fuctionality.

__________________
Nathan

2005 FPV BF Super Pursuit

The new toy (now sold)
The SP


The old ute (sold)
www.aufalcon.com/nc1183

Build Thread


Quote:
Originally Posted by F6T
If you look closely you can see the remains of a Hyundai excel that’s been sucked into the intake.
about the pic of 'CHOP YA' F6
NC1183 is offline   Reply With Quote Multi-Quote with this Post
Old 26-08-2007, 07:43 PM   #2
JC
Miami Pilot
Donating Member2
 
JC's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 21,704
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Quote:
Originally Posted by NC1183
Is it possible to wire the dome lights so that they have the ON - OFF - DOOR fuctionality.
Which bit specifically are you after? Some Ex Police pack cars come with a switch that turns the lights off (my ex NSW police car had such a switch). Other than that, you can turn the light on by using the switch the forms part of the headlight switch, and the standard setting is for the light to come on when the doors open, but there is no default off function. Installing a standard rocker switch in the light assembly would give you an off option though.
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb)
1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs).
Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s

Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings

FPV 335 build stats: <click here>

Ford Performance Club ACT
JC is offline   Reply With Quote Multi-Quote with this Post
Old 27-08-2007, 11:22 AM   #3
superroo
You can't stop the signal
 
superroo's Avatar
 
Join Date: Nov 2005
Location: Behind a computer at work
Posts: 1,624
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Has done quite a few excellent write ups for au .com 
Default

You can rewire the standard switch(the slider on the side) to do this but it will involve cutting of the switch loom, some rewiring and you will loose the high/low cluster light settings.

I'm sure it's possible because i just installed courtesy footwell lights (neons actually), that i can manually operate through the headlight switch slider. I did this because my cluster is LED's and the rest of the car's instrument lighting will be changed to LED's soon anyway, so the high/low light setting is of no use to me.
They way i have wired my lights is they will come on when ever the dome lamp comes on, and
Bottom position - Off - only come on when a door is open
Middle position - On - They are on but the dome light is not. they stay on regardless of ignition position. Dome light will come on when a door is opened
Top position - On and dome - This position works as normal

So it is possible. If you want a wiring diagram made i should be able to do, but what level (high/low) do you wanT the dash lights to be at?

Cheers
__________________
Quote:
Originally Posted by Matt Brown
I own a Dodge Viper and a minivan, and if I could only keep one of them, it would be the minivan
superroo is offline   Reply With Quote Multi-Quote with this Post
Old 27-08-2007, 09:18 PM   #4
Jastel
Donating Member
Donating Member1
 
Join Date: Dec 2006
Posts: 5,550
Technical Contributor: For members who share their technical expertise. - Issue reason: Has much experience with taxis and always jumps on here to explain things simply and help out the new guys in B-series and Contemporary... 
Default

I put a small switch up above the seat belt in the creamy plastic part near the roof, I cut into the dome light wire to turn it off, turn it on and it works as normal. Turn it off and it won't come on at all even with doors open.

Sorry cant remember the wire colors now.
Jastel is offline   Reply With Quote Multi-Quote with this Post
Old 27-08-2007, 09:32 PM   #5
Mechan1k
Moderator
Donating Member1
 
Mechan1k's Avatar
 
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,403
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Brings a wealth of knowledge to the forums and is frequently giving helpful advice. Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to help out with technical information. 
Default

I realised the other day it'd be nice to have an OFF switch for it ... especially when the door ajar switch in the actuator fails ... and the interior light stays on ... or worse still flickers while driving at 5am to work in the morning.

I really was not in the mood for a disco at 5am.

At least pulling the CRT Lamp fuse didn't immobilise the ute .... I just didn't have interior lights for a day or so ... thank god.

I think the driver's door actuator shorts out in heavy rain for some reason ... and thinks the door is open.
Mechan1k is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 08:54 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL