|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-04-2007, 01:12 PM
|
#1 | ||
|
t i c k f o r d
Join Date: Mar 2007
Location: Melbourne
Posts: 183
|
Hi all
I signed up a few weeks ago after lurking around for a while but haven't posted anything until now. Anyway I had a wheel off yesterday and noticed the brake calipers were PBR branded. I wasn't sure if they should have ford logos or tickford wings on them so just want to know if these are standard calipers or factory options, unless a previous owned has upgraded them? Cheers
__________________
AUIII XR6 VCT Liquid Silver / Manual / Leather / Momo Wheel & Shifter / Premium Sound / Lovells Superlows / Koni Reds / T3 Pursuit Rims / Pacemaker 4499s / 2.5 Inch Exhaust |
||
|
|
|
10-04-2007, 01:37 PM
|
#2 | ||
|
Banned
Join Date: Jan 2005
Posts: 310
|
PBR calipers were used on AUII and AUIII they will be twin pots havnt notice any calipers with the ford logo on them as they are all manufactured by other companies the Tickford winged badge was stampped onto the T series brakes i believe. So these are just stock calipers.
|
||
|
|
|
|
10-04-2007, 02:17 PM
|
#3 | ||
|
not here much anymore
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
|
PBR make all the calipers be it stock brakes or Tickford brakes etc. As has been said, if they are standard brakes they will have the PBR logo cast into the caliper on the side and no other markings, if they are Tickford brakes they will have a larger 330mm disc and have the Tickford wings cast into the face of the caliper.
__________________
2024 F150 XLT
|
||
|
|
|
|
10-04-2007, 04:17 PM
|
#4 | ||
|
t i c k f o r d
Join Date: Mar 2007
Location: Melbourne
Posts: 183
|
Thanks fellas, I was doubtful they would have been an upgrade providing fronts and rears are both PBR when often you only usually see fronts upgraded if done aftermarket, was just unsure as far as factory options went. Still can't complain for a stock caliper after having an e series, but an upgrade like the one offered by FTG would be nice down the track.
__________________
AUIII XR6 VCT Liquid Silver / Manual / Leather / Momo Wheel & Shifter / Premium Sound / Lovells Superlows / Koni Reds / T3 Pursuit Rims / Pacemaker 4499s / 2.5 Inch Exhaust |
||
|
|
|
XR Series Brakes
Linear Mode
