|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-04-2007, 03:33 PM
|
#1 | ||
|
Flying high...
Join Date: Aug 2005
Location: QLD
Posts: 277
|
Does anyone know where is the best place to run wires through the firewall on the right side that has the easy access to???
__________________
AU1 Forte - 17'' AU2 Tickford rims on all corners, Super low springs,
KYB shock absorbs + camber castor kit and a 3.45 LSD, Tickford snorkel, 3" mandrel intake, K&N pod in the box, Polished Rocker Cover. |
||
|
|
|
10-04-2007, 03:45 PM
|
#2 | ||
|
___________
Join Date: Jan 2005
Posts: 611
|
If your car is auto you can run them through the clutch cable hole.
|
||
|
|
|
|
10-04-2007, 03:46 PM
|
#3 | ||
|
Flying high...
Join Date: Aug 2005
Location: QLD
Posts: 277
|
Is that on the right side of the firewall?
__________________
AU1 Forte - 17'' AU2 Tickford rims on all corners, Super low springs,
KYB shock absorbs + camber castor kit and a 3.45 LSD, Tickford snorkel, 3" mandrel intake, K&N pod in the box, Polished Rocker Cover. |
||
|
|
|
|
10-04-2007, 04:05 PM
|
#4 | ||
|
Stroking it...
Join Date: May 2005
Location: The 'butt
Posts: 2,844
|
I'm with LOWAU, i ran mine through clutch cable hole, otherwise you could use the hole where the bonnet release cable goes through? Just "modify" the little rubber grommet thingy?
__________________
Had: 347ci AU Then:  Now: Busted assed EB Wagon - 5sp and Dual Fuel. |
||
|
|
|
|
10-04-2007, 04:12 PM
|
#5 | ||
|
Flying high...
Join Date: Aug 2005
Location: QLD
Posts: 277
|
Ive already used my clutch cable hole for my thick amp wire and that was a tight squize for it. Ive found another hole behind the washer bottle which is on the right hand side. To get it through, I popped open the passenger access for the airbag and used an old coat hanger to pull my wire through. Thanks for your replies.
__________________
AU1 Forte - 17'' AU2 Tickford rims on all corners, Super low springs,
KYB shock absorbs + camber castor kit and a 3.45 LSD, Tickford snorkel, 3" mandrel intake, K&N pod in the box, Polished Rocker Cover. |
||
|
|
|
|
10-04-2007, 05:06 PM
|
#6 | |||
|
Banned
Join Date: Dec 2004
Location: searching for cubes
Posts: 6,672
|
Quote:
 Best place is the hood release cable grommet. |
|||
|
|
|
|
10-04-2007, 06:17 PM
|
#7 | |||
|
Boost Addict
Join Date: Jan 2005
Location: North Brisbane
Posts: 1,151
|
Quote:
correct if u try and squeeze wires through withou grommet u may run risk of shortening them out
__________________
N12 Pulsar - sold Gen1 Liberty Turbo - sold VP Commodore Turbo - sold LN65 Hilux Turbo - sold EL31 Corolla Turbo - sold Ford AU Ute Turbo - sold Ford AU XR8 Sedan - 5.4l V8 Turbo (in the build) Ford BA XR6T Ute - daily driver Ford FG XR6T Sedan - cruiser do you see a general trend? I DO  Can't live with it, can't live without it! |
|||
|
|
|
|
10-04-2007, 06:18 PM
|
#8 | ||
|
Flying high...
Join Date: Aug 2005
Location: QLD
Posts: 277
|
 : Sorry, I was look at the engine when I mean the right hand side, so left hand side if you are inside the car. :
__________________
AU1 Forte - 17'' AU2 Tickford rims on all corners, Super low springs,
KYB shock absorbs + camber castor kit and a 3.45 LSD, Tickford snorkel, 3" mandrel intake, K&N pod in the box, Polished Rocker Cover. |
||
|
|
|
|
10-04-2007, 07:40 PM
|
#9 | |||
|
Banned
Join Date: Dec 2004
Location: searching for cubes
Posts: 6,672
|
Quote:
PS ... and, just like a horse it is the near side ...
|
|||
|
|
|
|
10-04-2007, 09:11 PM
|
#10 | |||
|
Blown 5L coming
Join Date: Dec 2006
Location: Warwick, QLD
Posts: 1,997
|
left side is the side of car is the passenger side, right side is the side the driver sits (becuase the driver is always right!!
:P : )unless of course the car is left hand drive.....then its.....well, its not rocket science, lets put it that way  ing_sm
__________________
1995 EF Fairmont was stocko 6cyl with open single spin diff....NOW WITH XR8 ENGINE, DRIVELINE AND SUSPENSION!!!!! Maybe by the end of 2010 there may just be a blower as well ;) NEW CLUB FOR SUNSHINE COAST !! www.f-p-e.proboards.com Contact Col (au2sw) via PM or on MSN @ efmonty@hotmail.com Quote:
|
|||
|
|
|
Running wires through firewall? (right side)
Linear Mode
