|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
18-09-2009, 09:57 PM
|
#1 | ||
|
Regular Member
Join Date: Feb 2006
Posts: 394
|
Hello All,
I am looking at putting a bigger cam in my XR6 for more mid to high power, what camshafts have people used in their XR's and what success did you have? i have already got a 2.5 straight through exhaust system and about to put on a 100 psi cat and pacie comp extractors. Any help would be good. Cheers |
||
|
|
|
18-09-2009, 11:29 PM
|
#2 | ||
|
Just slidin'
Join Date: Sep 2005
Location: Brisvegas
Posts: 7,791
|
Ring Surecam, tell them what you want, and what you have. They will set you up.
I run one, Stattic, Stav, 510AU, OED666, Stiddy etc all do as well. I know this isnt exactly for the XR6 specifically, but seeing as they are basically the same engine, I thought I could help. Our lift ranges from .499 to .565, and Duration from 212 to 218 @ .050.
__________________
MD Mondeo - For the family
NP Pajero - For the adventure |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Camshaft Advice
Linear Mode
