|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
06-02-2015, 08:49 PM
|
#1 | ||
|
The 'Stihl' Man
 
Join Date: Jan 2005
Location: TAS
Posts: 27,603
|
I know this will sound odd but if I have a 2.5t hydraulic jack, I usually place it just behind the front wheels to lift then insert axle stands.
Problem is that the jack has a circular face/contact and sometimes to make it flush I have to be at a large angle to still squeeze the stands in. Can I lift front the front straight up underneath the k frame? I can do it my old way but if I can go straight from the front it will be a lot less stuffing about.
__________________
Last edited by Polyal; 06-02-2015 at 08:55 PM. |
||
|
|
| Thread Tools | |
| Display Modes | |
|
|
Jacking up an AU
Threaded Mode