|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
15-08-2007, 05:12 PM
|
#1 | ||
|
Regular Member
Join Date: Apr 2006
Location: Brisbane
Posts: 197
|
Evening all, today I carried out a rear drum to disc conversion on my '06 Zetec, the brakes were off an ST (thanks Adam at Britek) and the whole operation was painless and only took about two lazy hours to complete, with everything bolting and clipping on quite easily, no modifications needed.
Only one carry over niggling issue is the ABS light is now on, on the dash. Could either need a code clearing in the ECU or putting the original Zetec sensors back in instead of using the ST ones, either way should be a ten minute fix. |
||
|
|
Zetec Rear Drum to Disc Conversion
Threaded Mode