|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
12-09-2009, 01:08 PM
|
#1 | ||
|
Regular Member
Join Date: Jun 2007
Posts: 34
|
Hey guys, last step before the new 19s go on is the front susp bushes, just installed the new slotted/drilled rotors this week and have had the front guards rollled. I'm off to re do the bushes on the front. What i have so far is the the D shaped bushes off the sway bar (x2), the sway bar pin bushes (x8), the upper control arm bushes (x4) and two lower control arm bushes (x2) and my all ball joints (x4 for upper and Lower) so a total of 18.... am i missing anything else for the front susp bits???
I'm doing all in rubber because ill lose most of the ride from the 19s anyway so dont want to make it worse by put nolathanes all round, no real use i think the barge isnt really made to go around corners. Cheers guys. Alex P.S. im holding off photos of the interior and exterior till she's done....  |
||
|
|
Susp. Bushes
Threaded Mode