|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| Drag Racing Discuss Drag Racing here be it dirt or tarmac. Sponsored by Sydney Dragway. |
|
|
Thread Tools | Display Modes |
17-03-2006, 11:11 PM
|
#1 | ||
|
RIP Craig - 13/11/08
 
Join Date: Feb 2005
Location: Kilmore, 30 minutes from Heathcote Raceway
Posts: 3,571
|
Took the old 3Valve XT out to calder tonight for a few runs after a couple of exhaust changes today. Went straight to scrutineering with standard road tyres then raced.
1 = 1.96 60ft 13.45 @ 101.86 2 = 2.76 60ft 15.31 @ 99.97 (Launched at 3,000RPM tyre spin central) 3 = 2.09 60ft 13.72 @ 102.08 Went to the pits and put on my M/T street radials with the following results. 4 = 1.99 60ft 13.47 @ 103.14 5 = 2.02 60ft 13.63 @ 100.75 6 = 1.89 60ft 13.32 @ 102.54  : : 7 = 1.99 60ft 13.39 @ 102.26 Run 6 is a new PB for the 3 valver..... Thanks to Di Filippo Performance Exhausts for spending the time to make up an exhaust that i really wanted to try, thanks to Chris (Bluepower) for crew chiefing tonight. And thanks to Calder the fries tonight were magnificent... Can't wait to the next time. :sm_headba :sm_headba Regards Craig |
||
|
|
ACE 3V PB @ Calder
Threaded Mode