|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
16-07-2006, 07:49 PM
|
#1 | ||
|
Regular Member
Join Date: Apr 2006
Posts: 72
|
Hey guys,
Wondering if someone could help me out. I am able to get my hands on the rear end of a 105e Anglia, diff, leafs etc. Will any of these parts bolt up to my escort. Is the diff ratio any different, are the drums bigger then those on a 1.6L mk2 escort. Would the leafs be a better swap seeing as I have a 1.6L leafs with a 2.0L engine would it stiffen things up ?? Cheers PS this is all for a Mk2 Escort (4 door) |
||
|
|
|
07-12-2006, 09:05 AM
|
#2 | ||
|
State of Confusion
Join Date: Aug 2006
Location: Sydney
Posts: 86
|
The diff head will physically fit your Mk2 housing, but the drive flange will be smaller then the Escort tailshaft.
Ratio will possibly be 4.44 - worth some dollars to someone. Brakes will be virtually the same size on both. Don't throw the Anglia housing; they are slightly smaller in width and can be used for a 5 link set up with flares on an Escort. Bit of work but worth it. stephen |
||
|
|
|
Anglia to Escort
Linear Mode
