|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
23-12-2006, 11:09 AM | #1 | ||
XB in parts...
Join Date: Dec 2004
Location: Sydney
Posts: 2,890
|
How much of an effort is it to get glass back in it's track ?
One of my windows has slipped off the track and I'm wondering if this is something that's relatively easy to fix ? What tools do I need ? (I don't have electric windows)
__________________
Daily Driver 2019 Ford Escape...looking for XR6T's. |
||
23-12-2006, 12:32 PM | #2 | ||
Blown 5L coming
Join Date: Dec 2006
Location: Warwick, QLD
Posts: 1,997
|
theres not to much effort involved, as long as just slipping off the tracks is the only problem. what has caused it to slip from the track? you should only need a phillips head ( + ) screw driver to undo the door card door handle etc. then it can be as simple as lifting the window back onto the track, making sure it stays inside the guides up the door
|
||
23-12-2006, 12:45 PM | #3 | ||
FF.Com.Au Hardcore
Join Date: Sep 2005
Location: Belmont, WA
Posts: 1,301
|
Phillips head and 10mm socket and maybe an extension bar
But something must have caused it to come off the track in the first place, you might need to look into that while you are in there |
||
25-12-2006, 11:56 PM | #4 | ||
XB in parts...
Join Date: Dec 2004
Location: Sydney
Posts: 2,890
|
Thanks guys.
A philips head was all that was needed. The glass had just come off the track (two yellow bits at bottom of the door). I think it may also not have been sliding up the inside "rail" as it gets winded up and down. It wasn't too difficult at all to fix.
__________________
Daily Driver 2019 Ford Escape...looking for XR6T's. |
||