|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
17-01-2007, 09:09 AM
|
#1 | ||
|
Regular Member
Join Date: Mar 2006
Location: Tassie
Posts: 142
|
Hi
Looking at putting Mk2 struts in a mk1 track day car. If we were to use mk2 struts would we need the mk2 control arms, crossmember and are the brakes a lot bigger?? Thanks |
||
|
|
|
17-01-2007, 12:37 PM
|
#2 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
dont know about the wheel alignment problems
the ratio might be better in the rack and pinion the lower ball joint looked the same in the MK 1 as the mark 2 to me sounds like a very good mod
__________________
My car goes Brumm Brumm |
||
|
|
|
|
17-01-2007, 02:20 PM
|
#3 | ||
|
Starter Motor
Join Date: Jan 2006
Location: Melbourne SE Suburbs
Posts: 9
|
i believe the ball joints are actually a different size..
if its for a track car try getting a set of complete capri sttruts, bigger brakes and larger diameter post, these will fit straight into a mk1
__________________
The Toys Daily - Mk1 Escort Panel Van - 2litre converted, re-trimmed interior, 4.11 diff, 4spd, In the build - Mk1 escort 4dr, 2lt Pinto, |
||
|
|
|
|
17-01-2007, 05:18 PM
|
#4 | ||
|
Regular Member
Join Date: Jun 2005
Posts: 126
|
I put mk2 struts on my mk1 and there was no dramas. The only hard part was trying to find a set of mk2 struts!!
|
||
|
|
|
Mk2 struts
Linear Mode
