|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
18-05-2007, 08:38 PM | #1 | ||
Regular Member
Join Date: Jan 2006
Posts: 170
|
Hi guy's.
I got out of my car at the shops before and the remote locking wouldnt work. It was giving me the chirping horn noise, telling me that I had left a door open. After opening and closing them about 10 times, I couldnt work out what was going on! The 'doors open' icon was on as well as the interior light. The car is a ute, so only 2 doors, and there is nothing stopping them from closing. Anyone able to shed some light on what the problem might be? I cant seem to find the door switches to check them either? Weird. |
||
18-05-2007, 11:14 PM | #2 | ||
Moderator
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,403
|
I had the same issue ... and then it stopped.
I asked the Ford tech guy at my local service department. He said 9 times out of 10 it is one of the actuators ... as they tell the BEM that either door is open. Either that or it's the BEM playing up. When sitting in the ute with both doors closed ... when trying to lock it with the dash button or the driver's door button ... do the locks cycle down then up quickly .... or does one of the door locks sound like it is making a grinding sound???? I am putting money on a faulty actuator. They are about $130 from for plus a $12 loom for adapt from the BA actuator that they only supply now to the AU loom. I can't remember the process of testing which door it is though ... but I remember JC mentioning something on this though. Oh ... there are no separate door switches ... it's a part of the actuator as mentioned ... it is also one complete unit that incorporates the door lock inside the door itself that locks onto the striker on the door frame.
__________________
The Current Stable 2016 SZII TS Territory RWD Petrol The Evolution of the EGA54D utes AU Workshop Build thread of EGA54D B-Series Workshop Build thread of EGA54D 2004 SX TX Territory AWD - Gone but not forgotten 2010 FG XT "The ex-rental" - Moved onto a new home Mechan1k's Flickr Page |
||
19-05-2007, 07:25 AM | #3 | ||
Regular Member
Join Date: Jan 2006
Posts: 170
|
Thanks mechan1k.
If i sit in the ute and push the button down, they just pop up again, there is no grinding sound. So the 'switch' is part of the locking mech? I couldnt find any info in the Max Ellery handbook about it. Scott. |
||
22-05-2007, 07:11 AM | #4 | ||
Moderator
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,403
|
I was searching high and low for it as well ... and the Ford tech at the service department I take my Territory to told me about it. I trust the guy ... has been pretty good in the past for me.
__________________
The Current Stable 2016 SZII TS Territory RWD Petrol The Evolution of the EGA54D utes AU Workshop Build thread of EGA54D B-Series Workshop Build thread of EGA54D 2004 SX TX Territory AWD - Gone but not forgotten 2010 FG XT "The ex-rental" - Moved onto a new home Mechan1k's Flickr Page |
||