|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
24-09-2007, 03:03 PM
|
#1 | ||
|
Starter Motor
Join Date: Aug 2007
Posts: 2
|
I've just bought my first Falcon, an AU wagon, after 20 years of Holdens. All is going well except for the Smart lock. I've read through the threads but can't find a similar problem.
The rear right actuator was stuffed so I replaced that today. All doors now lock/unlock properly using the key in the lock. The remote is communicating but will not lock or unlock the doors. I get multiple beeps from the horn which I believe means the system thinks a door is open - which it's not. The interior light powers down after 30 seconds which also indicates the doors are closed. What do I check next? |
||
|
|
|
24-09-2007, 04:17 PM
|
#2 | ||
|
Kermit the Frog
Join Date: Dec 2005
Location: St Kilda
Posts: 136
|
Have you tried reprogramming the remote?
|
||
|
|
|
|
24-09-2007, 04:40 PM
|
#3 | ||
|
Starter Motor
Join Date: Aug 2007
Posts: 2
|
I figured it wouldn't be necessary as it seemed to be communicating. I gave it a go anyway and all seemed to happen correctly, except when the locks 'cycled' you could hear the actuators operating, but the door lock button didn't move.
|
||
|
|
|
Smart lock problem
Linear Mode
