|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
28-10-2007, 06:26 PM
|
#1 | ||
|
Regular Member
Join Date: Feb 2006
Location: Brisbane
Posts: 45
|
When I go to start my car first thing in the morning, it usually takes a couple goes. It usually goes like this
engine turns over a couple times, nearly starts engine starts, runs for 5 secs then stalls engine starts, runs for 10 secs then stalls engine starts and runs fine its usually only the first start of the day when this happens, from then on its fine  used: What could the problem be??? its a series 2 manual ute |
||
|
|
|
28-10-2007, 06:45 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Sep 2006
Posts: 2,981
|
fuel or spark, whens the last time the plugs and lead were replaced
|
||
|
|
|
|
28-10-2007, 07:03 PM
|
#3 | |||
|
That's Numberwang!!!
Join Date: Feb 2006
Location: Hoppers Crossing, Vic
Posts: 99
|
I had what sounds like a similar problem in my AU2 Ghia.
I ended up doing a reset and changed the battery and have not had the problem since... Hope it helps
__________________
www.aufalcon.com.au/only1 FAIRMONT GHIA: SO GOOD, THEY NAMED THEY NEW FALCON AFTER 'EM Quote:
|
|||
|
|
|
|
28-10-2007, 10:32 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2007
Location: perth w.a
Posts: 1,074
|
yeah try resetting the ECU 1st & see if that helps....
|
||
|
|
|
|
28-10-2007, 10:42 PM
|
#5 | ||
|
Walking with God
Join Date: Mar 2005
Location: Melbourne
Posts: 7,321
|
Reset the computer. Then if no joy, change the plugs.
Changing them is a 15-20 minute job and plugs are only $4 a pop for standard items. If still no joy, then I'd clean the ISC valve, then if still no joy, clean out the throttle body. If that doesn't help any, you could possibly change the fuel filter. Resetting of AU ECU http://www.fordforums.com.au/showpos...9&postcount=85 Cleaning ISC Valve http://www.fordforums.com.au/showpos...9&postcount=43 Cleaning Throttle Body http://www.fordforums.com.au/showpos...2&postcount=48 Changing Fuel Filter http://www.fordforums.com.au/showpos...3&postcount=37 All the best with it. GK
__________________
2009 Mondeo Zetec TDCi - Moondust Silver 2015 Kia Sorento Platinum - Snow White Pearl 2001 Ducati Monster 900Sie - Red Now gone! 1999 AU1 Futura Wagon - Sparkling Burgundy On LPG Want a Full Life? John 10:10 |
||
|
|
|
car stalls when starting
Linear Mode
