|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
29-10-2007, 07:06 PM
|
#1 | ||
|
buickman
Join Date: Dec 2004
Location: eastern suburbs Melb Vic
Posts: 1,462
|
Have done a search but could not come up with a answer.
A mates XR AU3 has 2 broken head lights by stones on a recent highway trip and has asked me to help him replace them. Before he brings the car over I want to see what works involved. Does the front bar have to come of the car to replace them ? |
||
|
|
|
29-10-2007, 07:14 PM
|
#2 | ||
|
windsor user
Join Date: Dec 2004
Location: Geelong
Posts: 13,123
|
bar off, 4 bolts on the headlight......hopefully the brackets on the plastic frame arent broken, if so it needs plastic welding...
use a hair dryer to lightly soften the white plastic clips on the adjusters, and use a blade screwdriver to prise the clip off the adjuster bolts. its a little difficult, but once you work out how to do it you should be right. do you have an old light with good beams to replace them with? they're not something you can just buy seperate |
||
|
|
|
|
29-10-2007, 08:56 PM
|
#3 | ||
|
buickman
Join Date: Dec 2004
Location: eastern suburbs Melb Vic
Posts: 1,462
|
Thanks. Do you have to buy the complete unit with both lights? sounds a ripoff to me.
|
||
|
|
|
|
29-10-2007, 09:28 PM
|
#4 | ||
|
Only an xr6...
Join Date: May 2005
Location: Brisbane
Posts: 539
|
Yeah if you go through ford you have to replace the whole kit. But Pm "the Dok" and he'll be able to help you at at a cheaper rate then ford.
|
||
|
|
|
|
29-10-2007, 09:32 PM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Posts: 805
|
Ford stopped selling the AUXR in part formation a few years ago, nowadays you can only purchase the headlight as a complete unit (not cheap either).
If you need to purchase just the inner & outer beams, send me a PM, I have a few used ones in stock.  _2:Thanks Phil, (dishpig) appreciate the mention  :
__________________
Removed by laminge |
||
|
|
|
AU S3 XR headlight removal
Linear Mode
