|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-09-2009, 10:17 PM
|
#1 | ||
|
AU II XR8
Join Date: Mar 2006
Location: melbourne
Posts: 978
|
Before I take my XR8 for a bit of a drive on the weekend, im planning on changing the oil for the engine, and the fluids for the diff and gearbox. The engine side of things has been sorted. I have some of the castrol SAF-XA fully synthetic LSD oil and a bottle of nulon diff treatment. So I would like to know what people think of that oil, personly i cant see what could be wrong with it, but i recall reading that Penrite make a fairly decent diff oil.
As for the gearbox, I havent got anything for that yet, so what do people recommend? Its manual BTW Also the engine oil is 10w-40, is this what most people tend to run?
__________________
AU XR8 II ute XD FAIRMONT GHIA 302 XA FAIRMONT 302 TOPLOADER |
||
|
|
|
08-09-2009, 05:11 PM
|
#2 | ||
|
Regular Member
Join Date: Jan 2005
Location: Canberra
Posts: 364
|
I replaced the diff oil in mine using synthetic Castrol and a few days later it was leaking out of the pinion seal. Various specialists said the change from mineral to synthetic was the cause, but others have done the same without the leak occuring.
As for the gearbox, I've never replaced the fluid and engine oil I always use Penrite HPR 10.
__________________
FPV GS Ute #370/Brembo brakes |
||
|
|
|
A few questions on AU XR8 II
Linear Mode
