|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| Drag Racing Discuss Drag Racing here be it dirt or tarmac. Sponsored by Sydney Dragway. |
 |
|
|
Thread Tools | Display Modes |
03-12-2009, 04:59 PM
|
#1 | ||
|
Regular Member
Join Date: Oct 2009
Posts: 61
|
Im replacing my NOS big shot plate with a ZEX perimiter plate, i know NOS brand jets arent suitable but need to know will the ZeX jets fit into the -6 lines that are supplied with the NOS big shot kit??
Cheers
__________________
Tyres are evil and must be punished |
||
|
|
|
04-12-2009, 06:21 PM
|
#2 | ||
|
Regular Member
Join Date: Feb 2006
Posts: 316
|
Don't the jets sit inside an A/N fitting? Nothing goes in the line itself. It depends what size line is run with the zex kit. If it is a dash 4 line then use a speedflow Dash 6 to Dash 4 reducer. If the zex plate uses A/N fittings then yes the Dash 6 line will fit somehow.
|
||
|
|
|
|
05-12-2009, 02:27 AM
|
#3 | ||
|
Regular Member
Join Date: Oct 2009
Posts: 61
|
Im worried about the ZEX jets not being compatible with the an fitting, ive heard they are dimensionally different from the NOS brand jets but not sure if they mean flow wise or outside dia. wise
__________________
Tyres are evil and must be punished |
||
|
|
|
|
05-12-2009, 09:22 AM
|
#4 | ||
|
Regular Member
Join Date: Feb 2006
Posts: 316
|
You would assume that they mean flow rate as all nitrous kits are built with commercially available A/N fittings used. All commercially available A/N fittings are interchangable with the same threads and I/D's used. The O/D's, external appearance and the internal flow characteristics are the only variances better different brands of fittings
|
||
|
|
|
|
05-12-2009, 12:33 PM
|
#5 | ||
|
Regular Member
Join Date: Oct 2009
Posts: 61
|
Found this at Summit
"If converting your NOS® or Edelbrock® plate system to the ZEX™ Perimeter Plate, you will need to purchase ZEX™ compatible jets in the sizes that NOS® and Edelbrock® recommend for the plate you are replacing."
__________________
Tyres are evil and must be punished |
||
|
|
|
|
06-12-2009, 06:11 PM
|
#6 | ||
|
Regular Member
Join Date: Feb 2006
Posts: 316
|
Thats a good result. You only have to buy different jets
|
||
|
|
|
|
06-12-2009, 08:09 PM
|
#7 | ||
|
Regular Member
Join Date: Oct 2009
Posts: 61
|
Perhaps, but can only find ZEX jets up to a 175 shot
__________________
Tyres are evil and must be punished |
||
|
|
|
|
08-12-2009, 12:25 PM
|
#8 | |||
|
If it aint Blown it Sucks
Join Date: Dec 2004
Location: S E Melbourne
Posts: 2,115
|
Quote:
That will give you more ! perhaps the plate can't flow more than 175, or the solenoids etc don't forget the plate also has to flow the fuel as well.
__________________
Australia's fastest 3V n/a Ghia 13.52 @ 102 mph @235 rwkw !! Now turbo 11.77 @114 mph 320 rwkw, 810 nm torque, 280rwkw @3000 rpm !! :thebirds:  Now for salehttp://www.fordforums.com.au/showthread.php?t=11296772 Thanks to Snort Performance, Headsex and CVE Street car DeTomaso Pantera  Drag car 1995 Mustang, Haleys Comet ( It's back !) Power by CVE  Melbourne's first SNIPER Tuner  :Now tuning E series |
|||
|
|
|
ZEX perimiter nitrous plate
Linear Mode
