|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
30-06-2010, 01:23 PM
|
#1 | ||
|
Rob
Join Date: Jan 2010
Location: VN Capital
Posts: 1,584
|
I had my front pads changed a while ago.. and as per expected the noise under breaking while the pads are wearing in started.. but has never gone.
Its been roughly 15-20,000 ks and they still do it. Are the pads not bedded properly? Is there any other reasons while they would still be making this squeeking noise. If i drive as nice and easy it wont do it, as soon as i go a little bit harder.. warm or cold.. it does it. Any ideas?
__________________
99 liquid silver AU Classic -Sold
Supercharged Nissan 350z 280rwkw Blueprint series 3 AU V8 manual |
||
|
|
|
30-06-2010, 02:05 PM
|
#2 | ||
|
Resident AFF detailer
Join Date: Dec 2008
Location: Melbourne, VIC
Posts: 3,730
|
If you've done 15-20,000kms on them, they're well and truly bedded in....
Have you tried spraying them with some of that stop-squeal stuff?? What condition are your rotors in??? Do they need machining or replacing???
__________________
No longer an 'active' detailer. |
||
|
|
|
|
30-06-2010, 02:28 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Pit Lane
Posts: 11,867
 
|
What sort of pads are you using? some are just noisey
__________________
Pit Lane Performance 20 Rosella St Frankston 03 9783 8122 Authorised Streetfighter, Pcmtec , SCT & HP Tuners Tuning Agent,
|
||
|
|
|
|
30-06-2010, 09:25 PM
|
#4 | ||
|
Rob
Join Date: Jan 2010
Location: VN Capital
Posts: 1,584
|
they are bendix pads. I have new RDA slotted rotors to put on when i get some free time. So the normal stock ones. As far as i know/can see the rotors are fine.
Might try some spray stuff.
__________________
99 liquid silver AU Classic -Sold
Supercharged Nissan 350z 280rwkw Blueprint series 3 AU V8 manual |
||
|
|
|
|
30-06-2010, 09:58 PM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Pit Lane
Posts: 11,867
|
Which Bendix?
where your rotors machined when the new pads went on?
__________________
Pit Lane Performance 20 Rosella St Frankston 03 9783 8122 Authorised Streetfighter, Pcmtec , SCT & HP Tuners Tuning Agent,
|
||
|
|
|
|
30-06-2010, 10:02 PM
|
#6 | ||
|
Rob
Join Date: Jan 2010
Location: VN Capital
Posts: 1,584
|
not sure, and i doubt it.
__________________
99 liquid silver AU Classic -Sold
Supercharged Nissan 350z 280rwkw Blueprint series 3 AU V8 manual |
||
|
|
|
|
30-06-2010, 10:15 PM
|
#7 | ||
|
Custom Member
Join Date: Apr 2010
Location: NSW
Posts: 217
|
I find using black grease,use abit of grease at the edges of the brake pad back plate which contacts the brake calliper/calliper plates.When it slide doesnt create a noise or vibration...You will understand when you slide the pad in and out of the calliper so you will know where to lube the brake pad back.
|
||
|
|
|
|
30-06-2010, 10:43 PM
|
#8 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2008
Location: Parkdale, Vic
Posts: 1,016
|
BRAKES FFS not breaks
__________________
"You can't fight stupid people - there's just too many of them" |
||
|
|
|
|
01-07-2010, 06:46 PM
|
#9 | |||
|
The only thing u'll see!!
Join Date: Mar 2010
Location: Brisbane QLD
Posts: 498
|
Quote:
|
|||
|
|
|
|
01-07-2010, 07:23 PM
|
#10 | |||
|
pursuit ute baby
Join Date: Jun 2010
Posts: 864
|
Quote:
yea, massive saver on pads, and youll have a panel beater for a best friend too if youre lonely !! 
|
|||
|
|
|
|
01-07-2010, 08:21 PM
|
#11 | ||
|
KURS3D
Join Date: May 2010
Location: Brisbane, QLD
Posts: 14
|
lol lucky auturbo6 works with one
__________________
do u get it? no. ok let me speak moron for a minute |
||
|
|
|
Breaks still squeeking??
Linear Mode
