Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > The Pub

The Pub For General Automotive Related Talk

Reply
 
Thread Tools Display Modes
Old 06-10-2011, 10:01 PM   #1
Morry57
FPV170
 
Join Date: Apr 2011
Posts: 19
Default help asap....

hi xr8 is making clicking sound when starting? Thinking starter motor....? Any helpbe great cheeers???

Morry57 is offline   Reply With Quote Multi-Quote with this Post
Old 06-10-2011, 10:08 PM   #2
Bunyip04
Think Heavy..
 
Bunyip04's Avatar
 
Join Date: May 2010
Location: Top End
Posts: 1,043
Default Re: help asap....

Sounds like a bat flattery !!
__________________
________________________________________
07 BF MkII BOSS 260 XR8 6spd manual! EGO

There's no replacement for displacement!!!

Handling: Bilstein Shocks with King springs all round, Whiteline 27mm front swaybar & 22mm rear adj, upgraded PBR rotors, calipers and braided lines all round with Bendix Ultimate pads.
Go Fast Bits: Herrod C.A.I with K&N 4" pod flter, Herrod Helix spacer, Herrod oil breathers, Tridon 72c thermostat, Herrod 2.5" stainless cat back zorst.
Bunyip04 is offline   Reply With Quote Multi-Quote with this Post
Old 06-10-2011, 10:13 PM   #3
Pedro
FF.Com.Au Hardcore
 
Pedro's Avatar
 
Join Date: Oct 2005
Location: Hervey Bay
Posts: 4,198
Default Re: help asap....

^^^^
bas afove
The clicking is the solenoid caused by your fattery being blat.
Pedro is offline   Reply With Quote Multi-Quote with this Post
Old 06-10-2011, 10:18 PM   #4
Morry57
FPV170
 
Join Date: Apr 2011
Posts: 19
Default Re: help asap....

tried jumping but to no avail??
Morry57 is offline   Reply With Quote Multi-Quote with this Post
Old 06-10-2011, 10:21 PM   #5
Auslandau
335 - STILL THE BOSS ...
 
Auslandau's Avatar
 
Join Date: Dec 2004
Location: Melb East
Posts: 11,421
Default Re: help asap....

Sure the flattery you are using isn't bat as well?



__________________
'73 Landau - 10.82 @ 131mph
'11 FG GT335 - 12.43 @ 116mph
'95 XG ute - 3 minutes, 21.14 @ 64mph


101,436 MEMBERS ......... 101,436 OPINIONS ..... What could possibly go wrong!

Clevo Mafia
[SIGPIC][/SIGPIC]
Auslandau is offline   Reply With Quote Multi-Quote with this Post
Old 06-10-2011, 10:25 PM   #6
lockieoc
FF.Com.Au Hardcore
 
Join Date: Mar 2010
Location: Central Coast, NSW
Posts: 752
Default Re: help asap....

I've had batteries so dead that I couldn't jump them. As above bat flattery
lockieoc is offline   Reply With Quote Multi-Quote with this Post
Old 06-10-2011, 10:27 PM   #7
05_ENFORCER
 
05_ENFORCER's Avatar
 
Join Date: Jul 2005
Location: Perth, Western Australia
Posts: 4,513
Default Re: help asap....

Quote:
Originally Posted by Auslandau
Sure the flattery you are using isn't bat as well?

LMFAO


.
__________________
2015 FGX XR8 5.0 S/C 645 RWKW
05_ENFORCER is offline   Reply With Quote Multi-Quote with this Post
Old 06-10-2011, 10:28 PM   #8
Bunyip04
Think Heavy..
 
Bunyip04's Avatar
 
Join Date: May 2010
Location: Top End
Posts: 1,043
Default Re: help asap....

Might have try buy a new one, process of elimination from there.
__________________
________________________________________
07 BF MkII BOSS 260 XR8 6spd manual! EGO

There's no replacement for displacement!!!

Handling: Bilstein Shocks with King springs all round, Whiteline 27mm front swaybar & 22mm rear adj, upgraded PBR rotors, calipers and braided lines all round with Bendix Ultimate pads.
Go Fast Bits: Herrod C.A.I with K&N 4" pod flter, Herrod Helix spacer, Herrod oil breathers, Tridon 72c thermostat, Herrod 2.5" stainless cat back zorst.
Bunyip04 is offline   Reply With Quote Multi-Quote with this Post
Old 06-10-2011, 10:32 PM   #9
Morry57
FPV170
 
Join Date: Apr 2011
Posts: 19
Default Re: help asap....

tried battery in another car started no worries.....
Morry57 is offline   Reply With Quote Multi-Quote with this Post
Old 06-10-2011, 10:34 PM   #10
Bunyip04
Think Heavy..
 
Bunyip04's Avatar
 
Join Date: May 2010
Location: Top End
Posts: 1,043
Default Re: help asap....

Hmmmm, ignition relay...?
__________________
________________________________________
07 BF MkII BOSS 260 XR8 6spd manual! EGO

There's no replacement for displacement!!!

Handling: Bilstein Shocks with King springs all round, Whiteline 27mm front swaybar & 22mm rear adj, upgraded PBR rotors, calipers and braided lines all round with Bendix Ultimate pads.
Go Fast Bits: Herrod C.A.I with K&N 4" pod flter, Herrod Helix spacer, Herrod oil breathers, Tridon 72c thermostat, Herrod 2.5" stainless cat back zorst.
Bunyip04 is offline   Reply With Quote Multi-Quote with this Post
Old 06-10-2011, 10:34 PM   #11
Paxton
Cobblers!
 
Paxton's Avatar
 
Join Date: Mar 2005
Location: The Shire, NSW
Posts: 4,489
Default Re: help asap....

Are you in Park or Neutral?
__________________
Ego BFII Ghia
Titanium Silver E53 X5 4.4i
Gunmetal EF XR6. Now retired from active duty.
Roses are red. Violets are blue. OS X rocks. Homage to you.
Paxton is offline   Reply With Quote Multi-Quote with this Post
Old 06-10-2011, 10:35 PM   #12
falconhell74
FF.Com.Au Hardcore
 
falconhell74's Avatar
 
Join Date: Jul 2011
Location: Serpentine W.A.
Posts: 1,639
Default Re: help asap....

tyr removing the leads from battery & jumpstart with leads disconnected , if it starts then battery is totally fubar, If you have multi meter load test battery put leads from meter to battery terminals & turn key if voltage drups below 10.5 volts battery u/s. if power all good check power to exciter wire on starter should have battery voltage when cranked, if not replace starter relay as it could be burnt out/ still clicking over but no voltage output, if you have battery voltage at exciter wire then starter u/s
__________________
XC GS OLD SCHOOL MUSCLE

Audi A4 S-line quttro
Xc falcon
Previous fords-
xc falcon 500 ,250 x flow 3 speed
xc gs worked 250 x flow 4 speed
xa Fairmont 302 auto wagon
xb falcon 250 log auto 4 door
xb falcon 200 log auto ute
xc gs project - had to sell :-(
xc gs 302 4 speed 4 door
xc gs 351 auto 4 door
zf fairlane 302 auto
zk fairlane 250 x flow carb auto
zl fairlane 250 x flow EFI auto
xg ute , BA falcon dedicated gas
xd, xf x 3 ,ea,eb,ef,au x 3,telstar tx5
falconhell74 is offline   Reply With Quote Multi-Quote with this Post
Old 06-10-2011, 10:38 PM   #13
Geez Louise
Awesome
 
Geez Louise's Avatar
 
Join Date: Oct 2007
Location: In my own little world..Everyone here knows me :)
Posts: 9,401
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: All the behind the scenes things that help the community. 
Default Re: help asap....

Quote:
Originally Posted by falconhell74
tyr removing the leads from battery & jumpstart with leads disconnected , if it starts then battery is totally fubar, If you have multi meter load test battery put leads from meter to battery terminals & turn key if voltage drups below 10.5 volts battery u/s. if power all good check power to exciter wire on starter should have battery voltage when cranked, if not replace starter relay as it could be burnt out/ still clicking over but no voltage output, if you have battery voltage at exciter wire then starter u/s
Great post. There is some good advice right there.
__________________
Geez Louise is offline   Reply With Quote Multi-Quote with this Post
Old 06-10-2011, 10:44 PM   #14
AWD Chaser
Formally Kia Chaser
 
AWD Chaser's Avatar
 
Join Date: May 2005
Location: Newcastle
Posts: 2,493
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default Re: help asap....

Had this issue recently in my HSV - 3 batteries would not kick it over, but they worked in other cars - car would jump start, but no battery power while driving (only running on alt).

I could get power to the dash, but no crank, But there was no voltage drop on the bat when cranking.

Turned out I had a corroded terminal which was preventing enough current flowing to kick the motor over, but enough to run the electrics before cranking....
__________________
Kia Grand Carnival (2006)
Silver, Grill Mesh, Tints, Sidesteps (with lights), Towbar, 7" Touch Screen DVD Tuner with intergrated GPS & Bluetooth, Roof Mounted Flip Down 15.1" LCD Screen, Reverse Camera - 184Kw

HSV Clubsport R8 VY (2003)
Black, 6sp Manual, Coulson Seats, Red on black interior, Pacemaker extractors, Twin 2.5" exhaust, Custom Red 20" VE GTS Rims, Custom Red Stitching
AWD Chaser is offline   Reply With Quote Multi-Quote with this Post
Old 06-10-2011, 10:47 PM   #15
05_ENFORCER
 
05_ENFORCER's Avatar
 
Join Date: Jul 2005
Location: Perth, Western Australia
Posts: 4,513
Default Re: help asap....

Yep, dud cell I reckon.

These newer Fords need a good dose of current to fire them up.

Computer says no!


.
__________________
2015 FGX XR8 5.0 S/C 645 RWKW
05_ENFORCER is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 05:39 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL