|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
 |
|
|
Thread Tools | Display Modes |
09-10-2011, 05:23 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2006
Location: South Australia
Posts: 2,149
|
Hello all
Today i decided to repack my boat trailer bearings After dismantling them, it appears one had a leaky seal and the inside bearing was rusty. So decided to replace them. I managed to remove the outer (small bearing) cups from the hubs but struggling to remove the inner (large) cups. They have practically no over hang for them to be punched / pressed out. Any suggestions? thanks Luke
__________________
2015 Toyota Landcruiser 79 V8 SC |
||
|
|
|
09-10-2011, 06:51 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Canberra Region
Posts: 9,056
|
New hubs arnt that expensive....
__________________
2016 FGX XR8 Sprint, 6speed manual, Kinetic Blue #170 2004 BA wagon RTV project. 1998 EL XR8, Auto, Hot Chilli Red 1993 ED XR6, 5speed, Polynesian Green. 1 of 329. Retired 1968 XT Falcon 500 wagon, 3 on the tree, 3.6L. Patina project. |
||
|
|
|
09-10-2011, 06:59 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2011
Location: On The Footplate.
Posts: 5,086
|
Cold chisels are your friend...
|
||
|
|
|
|
09-10-2011, 07:03 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2006
Location: South Australia
Posts: 2,149
|
Thanks
I tried a heap with a cold chisel, just kept slipping. Managed to get it out after a tip from another forum - ran a weld bead along it which contracted it and it popped right out!
__________________
2015 Toyota Landcruiser 79 V8 SC |
||
|
|
|
Trailer bearings
Linear Mode
