Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 10-12-2005, 09:30 PM   #1
AU3FAIRMONT
Guest
 
Posts: n/a
Default touching up au front bar

ive got a a few underneath scratches on my au3 front bumper bar. i saw one time on a thread that if u give it a light sand underneath and use a bit of touch up paint on the required area it comes up like new. anyone heard this?

  Reply With Quote Multi-Quote with this Post
Old 11-12-2005, 08:34 AM   #2
Mechan1k
Moderator
Donating Member1
 
Mechan1k's Avatar
 
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,403
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Brings a wealth of knowledge to the forums and is frequently giving helpful advice. Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to help out with technical information. 
Default

good thread ... I have some scratches/gouges from the previous owner on the underside of the front bar.
Mechan1k is offline   Reply With Quote Multi-Quote with this Post
Old 11-12-2005, 08:36 AM   #3
Rob
Living the dream
 
Join Date: Nov 2005
Location: NSW
Posts: 1,795
Default

I did that to my old VP commo, it was metallic green. Used a bit of wet n dry, then sprayed. Came up alright considering it was just cheapo spray stuff from autobarn. Never had the glossy finish that the rest of the car did, but for an area rarely seen, it didnt matter. Give it a bit of cut n polish afterwards to enhance it, should come out alright.
Rob is offline   Reply With Quote Multi-Quote with this Post
Old 11-12-2005, 09:29 AM   #4
The Monty
Just slidin'
 
The Monty's Avatar
 
Join Date: Sep 2005
Location: Brisvegas
Posts: 7,791
Default

I hit a bat (not the wooden type) and took a big chunk of paint off. I got some touch up paint suited up, cost about $18 from autobahn, for a little tin, a small paint brush, and some 2000 grit sandpaper. All up it cost me $20.20. I think the sandpaper was too fine, so you are better off getting not so fine stuff. Sanded it back, past the primer, painted it on, really light sand on the edges, and clear coated over the top. Comes up nice, althogh no new looking, you dont really notice it if you didnt know it was there. Its a bout the sixe of a 50 cent peice and doesnt stand out at all. Hope this info is some help for you.
__________________
MD Mondeo - For the family
NP Pajero - For the adventure
The Monty is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 06:32 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL