|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
 |
|
|
Thread Tools | Display Modes |
03-10-2013, 01:57 PM
|
#1 | ||
|
Now With 2 Cylinders More
Join Date: Jan 2005
Location: Sunny Coast, QLD
Posts: 346
|
Hey guys,
This could be completley in the wrong section so if it is mods please move: I am just after a bit of a hand with an engine conversion that I have 95% completed on the sunny coast. Whilst its not an Ford, i know you guys are pretty switched on with this type of thing and I was hoping there would be someone that could either lend me a hand, some advice, or point me in the direction of a good auto electrician on the sunny coast/north brissy (car is at caloundra) that could help me get this last little bit done and help weed out the last few wiring gremlins. Feel free to PM me with any details of anyone you recommend or if you can help out this sat/sun ? Many thanks guys! Cheers Borry |
||
|
|
|
04-10-2013, 12:23 PM
|
#2 | ||
|
Now With 2 Cylinders More
Join Date: Jan 2005
Location: Sunny Coast, QLD
Posts: 346
|
... or even just a handy mechanic who knows a little about electrics ? would be happy to pay cash or beer or both
 feel free to PM
|
||
|
|
|
|
04-10-2013, 12:26 PM
|
#3 | ||
|
Donating Member
 
Join Date: Jan 2005
Location: Morayfield
Posts: 28,292
  
|
Borry,
What's the car and engine and what's the issue. I'd normally try to assist but this weekend is no good for me.
__________________
I love Holdens.... |
||
|
|
|
04-10-2013, 12:42 PM
|
#4 | ||
|
Now With 2 Cylinders More
Join Date: Jan 2005
Location: Sunny Coast, QLD
Posts: 346
|
Car is a 97 mirage, engine an a 2L mivec V6 out of an FTO - was throwing it together to make a handy lil fun daily.
Issues are the R) indicator stayign on and neither indicator working, high beam light stays on the dash at all times, and a couple of plugs dont have homes so just a little diagnosing to do, but im kind of at the end of my knowledge and a hand would be tops. All relatively small thigns, the engine side of things is all good, car starts, runs, all that stuff is fine. Its just the body wiring stuff that needs to be sorted otu for it all to be able to be put back together and sent off for a mod plate |
||
|
|
|
Anyone able to help ? North brissy/sunny coast
Linear Mode
