|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
 |
|
|
Thread Tools | Display Modes |
01-12-2013, 02:32 PM
|
#1 | ||
|
Starter Motor
Join Date: Oct 2013
Posts: 2
|
Hi all, my missus has a 2012 Territory running 235/60/17 tyres, I'm building a motorbike trailer that has EA stud pattern hubs & I wanted to fit Territory steelies to the trailer so that I could use spare from territory instead of carrying a trailer spare - I know EA-EL have a different offset to AU onwards rims but does that have any real effect or hindrance when fitted to a brakeless trailer hub? If I keep the tyre size on trailer to 235/60/17 can I use the territory spare without issue? Any help is appreciated, have tried googling this stuff but all posts found related to AU rims on EA style cars
|
||
|
|
|
01-12-2013, 03:12 PM
|
#2 | ||
|
^^^^^^^^
  
Join Date: Jan 2005
Location: online - duh
Posts: 9,642
|
The stud pattern is the same so as long as the Territory offset works on your trailer it'll be fine. Try the Terry spare on and check for clearance. I've run Territory wheels including their larger tyres on my box trailer (mainly used to carry bikes) for years.
The offset worked well for me (spaced under the guards ok and no rubbing) the only issue is if I load the trailer up with a decent load (eg. blue metal, sand) the taller tyres will rub on the tops of the guards. Pic here when it was all nice and new, sadly it doesn't look as good anymore. http://www.fordforums.com.au/attachm...id=23746&stc=1
__________________
.  Last edited by Raptor; 01-12-2013 at 08:11 PM. |
||
|
|
|
| This user likes this post: |
|
01-12-2013, 05:11 PM
|
#3 | ||
|
Starter Motor
Join Date: Oct 2013
Posts: 2
|
awesome - thanks man, it'll be a dedicated 2 bike trailer & has 5 leaf suspension so I think I'll be OK with load impact. Cant thank you enough for the quick reply and words of advice - wish my trailer looked as clean as yours! Will post some pics when it's all done
|
||
|
|
|
|
02-12-2013, 08:54 AM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Oct 2005
Posts: 589
|
the wheel shoud fit up ok, but the center rim bore is larger on territory* over the EA so the wheel will rely only on the nuts to centre it and also will affect it when you hit a pothole going 100kph with no support on center rely on nuts alone to hold true.
may need to get some centering rings from tyre shop to suit. *assume territry rims are similar to fg's* |
||
|
|
|
|
02-12-2013, 09:40 AM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2005
Location: G-Town, VIC
Posts: 783
|
It's pretty rare to see light trailers that are centred on the hub.
A new set of AU onward hubs and bearings is about $70 from a trailer shop which will give you the correct offset.
__________________
PX3 Ranger - family truckster
BF Fairlong Ghia - boostlounge 11.26 @ 121 |
||
|
|
|
Territory Rims, EA hubs all on a trailer advice!
Linear Mode
