Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 04-05-2014, 11:20 PM   #1
dwnsnow
Regular Member
 
Join Date: Mar 2011
Posts: 50
Default Help!!!!!

gday guys my series III xr8 au is playing up. the problem happens when a whine come from the motor alot like a supercharger, the car then looses alot of of power and dropping cylinders misses and carrys on. this happens very randomly sometimes high rpm mid rpm and low rpm with and without load

cheers guys.

dwnsnow is offline   Reply With Quote Multi-Quote with this Post
Old 05-05-2014, 08:25 AM   #2
Uncle_Ken
Next upgraded Mk1 Leopard
 
Uncle_Ken's Avatar
 
Join Date: Jan 2005
Location: Sydney, in the burbs
Posts: 4,915
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always putting some imput into the forums to help or make it a bit easier for others Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default Re: Help!!!!!

Have you done the usual ie checked/changed spark plugs, checked/changed fuel filter, checked/changed leads?

Uk
__________________
Plastic Surgery 1 AUII Monsoon Blue
Plastic Surgery 2 AUIII XR8 220 Rebel
Plastic Surgery 3 Watch this space ??? Living in AU Heaven
How 2's: Change rear view mirror, Install backfire valve, Change foam front seats, Install auto transmission cooler, Replace Trans Shift Globe, Remove front door Trim, Paint AU headlights, install door spears, Premium Rear Parcel Shelf, go here...
Uncle_Ken is offline   Reply With Quote Multi-Quote with this Post
Old 05-05-2014, 08:55 AM   #3
mytgxl
FF.Com.Au Hardcore
 
mytgxl's Avatar
 
Join Date: Oct 2006
Location: newcastle
Posts: 1,201
Default Re: Help!!!!!

Need to do a fault code diagnostics check & see what comes up!
__________________
Never drive faster than your guardian angle can fly but fast enough so the devil don't catch you!
mytgxl is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 05-05-2014, 09:38 AM   #4
mif73
CNC fixer guy
 
mif73's Avatar
 
Join Date: Sep 2006
Location: Melbourne Vic
Posts: 609
Default Re: Help!!!!!

Quote:
Originally Posted by dwnsnow View Post
gday guys my series III xr8 au is playing up. the problem happens when a whine come from the motor alot like a supercharger, the car then looses alot of of power and dropping cylinders misses and carrys on. this happens very randomly sometimes high rpm mid rpm and low rpm with and without load

cheers guys.
Cam synchroniser?
__________________
Weekend Toy: S1 AU Fairlane V8 with LTD bits, Tickford 17" wheels, front and rear chin spoilers, series 2 front brake conversion with Super pro bushes, Pacemaker headers, rear muffler removed, Kings/Pedders lowered suspension, Koni adj rears, painted headlight bezels, HR 2300kg hitch, 2 stage shift kit, trans cooler, reverse cam and media player.

Wife unit's : 2010 update FG XR6, reverse cam, HR 2300kg Hitch, German Maestro speakers, parcel shelf sub, trimmed mudflaps, batman stickers.
mif73 is offline   Reply With Quote Multi-Quote with this Post
Old 05-05-2014, 10:10 AM   #5
Muzza661
Starter Motor
 
Join Date: May 2014
Posts: 6
Default Re: Help!!!!!

Leads and plugs have been changed. About 5 codes come up relating to do with everything coil packs but like I said only happens when supercharger sounding noise comes from the motor
Muzza661 is offline   Reply With Quote Multi-Quote with this Post
Old 05-05-2014, 11:58 AM   #6
auIILTD
5.6L x 2 pilot
Donating Member2
 
auIILTD's Avatar
 
Join Date: Dec 2009
Location: Canbra
Posts: 15,065
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: For the effort put into the Australia day cruise to Albury Tech Writer: Recognition for the technical writers of AFF - Issue reason: AU Tech article. 
Default Re: Help!!!!!

I am with Mif. Sounds like a cam sync, with the exact same behavior I experience when I stipped a cam gear (that drives the cam sync).

Stu
__________________
2002 AU II LTD

5.6L 342ci T3 Short, AFR165 heads, Comp XE270HR-12 Cam, Brembo 4/4s(355/330), T3 5 spokes, LC-1 wideband, Whiteline HD swaybars, TCE 3K Hi Stall, PWR Auto Trans Cooler, Koni shocks, King Low Springs, Hurricane headers, 100 cpsi cats, Twin 2.5" exhaust.

Quarter Mile: 13.73 @ 105.86mph


Runner Up NA/DA to BF Fairlane/LTD Geelong AFD 2024

2002 XR8 pursuit 250

Custom twin 2.5" exhaust w Herrod modifed extractors, Tuned with Moates QH
auIILTD is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 05-05-2014, 12:51 PM   #7
Muzza661
Starter Motor
 
Join Date: May 2014
Posts: 6
Default Re: Help!!!!!

Quote:
Originally Posted by auIILTD View Post
I am with Mif. Sounds like a cam sync, with the exact same behavior I experience when I stipped a cam gear (that drives the cam sync).

Stu
Ok so where is the cam sync and is their a way to tell if it has had it
Muzza661 is offline   Reply With Quote Multi-Quote with this Post
Old 05-05-2014, 03:51 PM   #8
auIILTD
5.6L x 2 pilot
Donating Member2
 
auIILTD's Avatar
 
Join Date: Dec 2009
Location: Canbra
Posts: 15,065
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: For the effort put into the Australia day cruise to Albury Tech Writer: Recognition for the technical writers of AFF - Issue reason: AU Tech article. 
Default Re: Help!!!!!

Muzza, cam sync is the under your coil pacs on a AU V8. It is where your distributor would be if it where in an older car.

This is him:


Your best option would probablly to import one from the US and have a mechanic fit it up for you (half hour job).

This one is known worker on our engines.

http://www.rockauto.com/catalog/more...641&cc=1304435

Cheers
Stu
__________________
2002 AU II LTD

5.6L 342ci T3 Short, AFR165 heads, Comp XE270HR-12 Cam, Brembo 4/4s(355/330), T3 5 spokes, LC-1 wideband, Whiteline HD swaybars, TCE 3K Hi Stall, PWR Auto Trans Cooler, Koni shocks, King Low Springs, Hurricane headers, 100 cpsi cats, Twin 2.5" exhaust.

Quarter Mile: 13.73 @ 105.86mph


Runner Up NA/DA to BF Fairlane/LTD Geelong AFD 2024

2002 XR8 pursuit 250

Custom twin 2.5" exhaust w Herrod modifed extractors, Tuned with Moates QH
auIILTD is offline   Reply With Quote Multi-Quote with this Post
4 users like this post:
Old 13-05-2014, 12:52 AM   #9
Muzza661
Starter Motor
 
Join Date: May 2014
Posts: 6
Thumbs up Re: Help!!!!!

Thankyou to everyone who helped ended up replacing cam sync and harmonic as that was on its way out too. The car is like brand new smooth as a new car and power has increased significantly so cheers guys much appreciated
Muzza661 is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Reply


Forum Jump


All times are GMT +11. The time now is 04:24 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL