|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
17-12-2012, 06:48 PM
|
#31 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
|
it was quite a while ago when i had mine off , but i don`t remember it being anything other than a push on fitting.
|
||
|
|
|
17-12-2012, 07:12 PM
|
#32 | ||
|
Regular Member
Join Date: Sep 2011
Posts: 98
|
Thanks Mik your correct it's a push on and carefully prize off
 Better to be safe than sorry, my BA XR6 had little tabs to be squeezed as they're removed. The Millennium Fairlane now has a Momo wood grain steering wheel  Merry Christmas
|
||
|
|
|
|
17-12-2012, 08:19 PM
|
#33 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
|
yeah it does`nt hurt to be a bit cautious, i must confess i was a bit nervous mucking around with the air bags, i had it in the back of my mind static electricity could set them off........kept grounding myself every couple of minutes
 .
|
||
|
|
|
|
20-06-2015, 11:02 AM
|
#34 | ||
|
XR6T BA 2002
Join Date: Apr 2011
Posts: 683
|
T30 with hole in centre for air bag screws
 
__________________
XR6T 2002 BA
|
||
|
|
|
|
01-11-2016, 12:21 PM
|
#35 | ||
|
Guest
Join Date: Feb 2012
Location: Sydney
Posts: 653
|
The yellow plug for airbag just pulls off and pushes back on. The red connector has tangs to depress. I believe the Momo options have 5 sided tamper torx T30 and the standard wheels may use the 6 sided. Regardless, Kincrome do a full set of 6 sided Torx and Tamper Torx for under $40 and the 9 piece 5 sided Tamper Torx set is under $30 delivered from ebay. Total of $70 and there is so many uses for them besides the amount of Torx heads used on E and AU series cars. There are also steering wheel pullers for those who's wheel's are really hard to budge and don't want to trash the wheel by twisting it to loosen. With the cost and rarity of Momo wheels, I was happy to buy the correct tools and do it myself with clean hands and plenty of time to stay calm and do it properly.
|
||
|
|
|
Re: How hard to change the steering whee?
Linear Mode
