|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
18-12-2016, 06:42 PM
|
#1 | ||
|
Regular Member
Join Date: Nov 2016
Posts: 205
|
Ok when i bought myy car the p/s power windows wernt working,i took the window switch out an saw the front plug wasnt plugged in ,i connected it up an all is good...the p/s rear again had the plug not plugged in so i plug it in but nothing..i can hear this click sound when i press the switch an thats it
So what are the symtoms when the winddow regulator is stuffed as i want to isolate if its a reg problem,,even from thre drivers switches i get nothing for the p/s rear window all the rest are ok tho |
||
|
|
|
19-12-2016, 10:23 AM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2009
Posts: 727
|
The regulator has most likely died and has to be replaced. its an easy job, just remove the door trim and punch out the rivets that hold the regulator and motor. im not sure how much a replacement regulator will cost - google is your friend.
However, make sure the contacts on the switch are clean, give the switch a couple of hard taps - most times this may work before replacing the regulator. Good luck |
||
|
|
|
|
19-12-2016, 02:35 PM
|
#3 | ||
|
Donating Member
 Join Date: Nov 2011
Location: Melbourne
Posts: 4,573
|
Sounds like the switches (both driver's and LR) need to be pulled apart and cleaned.
Reg will normally be heard working but nothing happens, this is the symptom of a stuffed reg. |
||
|
|
|
|
19-12-2016, 04:48 PM
|
#4 | ||
|
Regular Member
Join Date: Nov 2016
Posts: 205
|
Contacts are clean same with the pin out plug sowith the window regulator if i need a rear reg are the plugs same throught the diffrent models liked if mine is a Fairmont can i use a fortes one.or ,xr / sr one
|
||
|
|
|
|
19-12-2016, 07:10 PM
|
#5 | ||
|
Regular Member
Join Date: Nov 2016
Posts: 205
|
Will any window regulator work as long as its an AU
|
||
|
|
|
|
20-12-2016, 02:43 PM
|
#6 | |||
|
Miami Pilot
 
Join Date: Jan 2005
Location: ACT
Posts: 21,703
|
Quote:
But if it is the motor, they should be generic so any AU will do.
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb) 1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs). Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings FPV 335 build stats: <click here> Ford Performance Club ACT |
|||
|
|
|
AU power window problem
Linear Mode
