|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
12-03-2006, 05:59 PM | #1 | ||
Starter Motor
Join Date: Mar 2006
Posts: 7
|
I have a AU1 Forte Station Wagon
Where do I attach the mute for my hands free? I've looked at the wiring diagram but it doesn't show me which one is the mute. And Is there an 'audio in' so I can run an external source (ie phone, i-pod) through the sterio? |
||
16-03-2006, 09:16 PM | #2 | ||
Starter Motor
Join Date: Mar 2006
Posts: 17
|
Remove radio cd player as described in these forums,But leave plugged in (or you will have to re-enter security code to use the unit again)...Attach a test light to earth, and probe each pin on the connector that is NOT used for wiring harness. There are approx 2 x 6 pins in the open connector. have the radio on when you do this, and when you get the right pin, the radio will mute and "TEL" will arrear on the display. This is the right one.
You can try soldering onto the pin, but the plastic might start to melt, so you would be better off finding a crimp connector to attach to the pin instead. Thats what i did last week, and it works well so far. Hope this helps you, Mark. PS: Audio in...?????This one I don't know sorry mate. |
||